Carbonating when bottling
Carbonating when bottling
I've just about got the hang of the brewing bit and have bottled up some quantity of wine but I feel the TC would benefit from carbonating. I've collected a load of Shepherd Neemes bottles to this end (a right drag having to empty them all first ) but am not too sure on the process from here.
Is it OK to clear the TC right down to crystal before bottling?
How much and what type of sugar in a 500ml bottle?
Is there a limit to the %ABV that will carbonate?
Advice would be appreciated as I have about 10 gallons waiting
Is it OK to clear the TC right down to crystal before bottling?
How much and what type of sugar in a 500ml bottle?
Is there a limit to the %ABV that will carbonate?
Advice would be appreciated as I have about 10 gallons waiting
It's best not to let the brew go crystal clear before bottling - you need some residual yeast to ferment the priming sugar, which should be around 1/2 teaspoon per pint bottle.
And yes, if it's a high gravity brew (e.g. wine strength), the yeast may struggle to ferment the priming sugar. Maybe a dose of fresh yeast when bottling? Someone with more experience of this type of brew may advise you better on that one.
And yes, if it's a high gravity brew (e.g. wine strength), the yeast may struggle to ferment the priming sugar. Maybe a dose of fresh yeast when bottling? Someone with more experience of this type of brew may advise you better on that one.
OK Gave it a try, Had a gallon og Pineapple brew to get bottled so used about a level teaspoon of the caramel syrup they sell for flovouring coffee and bottled in 500 ml Shepherd Neeme bottles. It's my daughter's birthday BBQ on the 20th and she asked for a Pineapple brew. We'll have to see if it carbonates or just tastes sweet.
I keep seeing the word "racked" on here. Is that just a term for transferring from 1 DJ to another (minus the sludge in the bottom) ?deepinvader wrote:It was started 26/7/08, racked into a DJ 30/7/08, racked again 3/9/08 and suddenly went as clear as you see. Just left it in the shed. Patience is obviously a virtue (and a poor memory helps )Garth wrote:..that is very clear mate...
The party went great, the bottled TC did not actually carbonate in time but no problem, by the time they got to that they were in no condition to care !!!!
The 3 gallons I put in a King Keg, gasssed to max a day in advance and re-gassed as it was used, didn't hold the gas, as soon as the froth cleared it was dead flat.
Any suggestions??
The 3 gallons I put in a King Keg, gasssed to max a day in advance and re-gassed as it was used, didn't hold the gas, as soon as the froth cleared it was dead flat.
Any suggestions??
keep it chilled if you can while it's gassing up, cold liquid absorbs more CO2. you're more likely then to have the tiny rising bubbles of a carbonated beer, rather than a massive frothy head on a really flat beer.
if it's bright beer (ie no yeast at the bottom) you can rock the keg from side to side while the gas is on and this will increase the surface area of the beer, allowing more CO2 absorption.
if it's bright beer (ie no yeast at the bottom) you can rock the keg from side to side while the gas is on and this will increase the surface area of the beer, allowing more CO2 absorption.