Carbonation Pressure/Temperature Chart

A forum to discuss the various ways of getting beer into your glass.
Fil
Telling imaginary friend stories
Posts: 5229
Joined: Sun Oct 16, 2011 1:49 pm
Location: Cowley, Oxford

Re: Carbonation Pressure/Temperature Chart

Post by Fil » Sat Dec 28, 2013 7:13 pm

why not condition at serving temps? if your trying to condition a bit quicker then a higher pressure and lower temp will do it, but its a much less precise method to achieve a target condition level and will probably involve a few days of venting excess condition.
ist update for months n months..
Fermnting: not a lot..
Conditioning: nowt
Maturing: Challenger smash, and a kit lager
Drinking: dry one minikeg left in the store
Coming Soon Lots planned for the near future nowt for the immediate :(

bigdave

Re: Carbonation Pressure/Temperature Chart

Post by bigdave » Sat Dec 28, 2013 7:22 pm

I can only control serving temp and the kegerator only holds one polykeg so have to condition at regular fridge temp. I'm yet to test how warm I can get the regular fridge thou. Maybe number 1 on the dial will be closer to 7 degrees.

Fil
Telling imaginary friend stories
Posts: 5229
Joined: Sun Oct 16, 2011 1:49 pm
Location: Cowley, Oxford

Re: Carbonation Pressure/Temperature Chart

Post by Fil » Sat Dec 28, 2013 8:38 pm

Ahhh ;) then yes for optimum condition set the pressure according to temp and desired condition level, and then when ready to tap you should have minimal tweaking /venting needed to just connect n pour.
ist update for months n months..
Fermnting: not a lot..
Conditioning: nowt
Maturing: Challenger smash, and a kit lager
Drinking: dry one minikeg left in the store
Coming Soon Lots planned for the near future nowt for the immediate :(

bigdave

Carbonation Pressure/Temperature Chart

Post by bigdave » Sat Jan 04, 2014 1:59 pm

I'm a little confused (whats new).

I've gassed my keg to 15psi to condition at 5º which will give 2.7volumes CO2 (a little high I know but hey ho). When I move to the kegerator to serve at 11º, do I maintain the 15psi pressure or increase the pressure to maintain the 2.7vols CO2 (21psi)?

Sorry if thats a stupid question.

I've decided that is a stupid question. If I maintain 15psi, the beer will lose condition so upping serving pressure to 21psi is the sensible answer.

User avatar
alexlark
Under the Table
Posts: 1403
Joined: Thu May 02, 2013 12:29 pm
Location: Rhondda, South Wales

Re: Carbonation Pressure/Temperature Chart

Post by alexlark » Thu May 22, 2014 5:50 pm

A nice printable Excel version of the carbonation chart with detailed temps in Celsius.

https://www.dropbox.com/s/duzao5flzo3ey ... -Chart.xls
Last edited by alexlark on Fri Dec 16, 2016 10:40 am, edited 1 time in total.

Fil
Telling imaginary friend stories
Posts: 5229
Joined: Sun Oct 16, 2011 1:49 pm
Location: Cowley, Oxford

Re: Carbonation Pressure/Temperature Chart

Post by Fil » Thu May 22, 2014 8:00 pm

Big Thanks Alexlark. i get quite annoyed having to convert the F readings of the standard US sourced job.
ist update for months n months..
Fermnting: not a lot..
Conditioning: nowt
Maturing: Challenger smash, and a kit lager
Drinking: dry one minikeg left in the store
Coming Soon Lots planned for the near future nowt for the immediate :(

big_o
Sober
Posts: 1
Joined: Thu May 12, 2016 2:37 pm

Re: Carbonation Pressure/Temperature Chart

Post by big_o » Wed Jun 15, 2016 1:03 pm

Yes, thank you. Will print this out and stick to my beer fridge :)

richc
Sober
Posts: 3
Joined: Tue Jul 31, 2018 8:50 pm

Re: Carbonation Pressure/Temperature Chart

Post by richc » Wed Aug 01, 2018 4:01 pm

I use one from this page that uses metric pressure units rather than PSI

http://mikebirdgeneau.com/blog/force-carbonation/

j444fog
Steady Drinker
Posts: 44
Joined: Fri Jul 03, 2015 4:44 pm

Re: Carbonation Pressure/Temperature Chart

Post by j444fog » Sun Nov 04, 2018 10:30 am

This might be a daft question, but how long do you need to keep the CO2 pressure on at the set temperature to get the level of carbonation you want?

User avatar
Jim
Site Admin
Posts: 10250
Joined: Sun Aug 22, 2004 1:00 pm
Location: Washington, UK

Re: Carbonation Pressure/Temperature Chart

Post by Jim » Sun Nov 04, 2018 11:54 am

j444fog wrote:
Sun Nov 04, 2018 10:30 am
This might be a daft question, but how long do you need to keep the CO2 pressure on at the set temperature to get the level of carbonation you want?
It depends on the temperature mainly; also the pressure difference between what it was and what you've just set it to. I've found it takes around 3 or 4 days at serving temperature (12-14C).

It's also quicker if you agitate it (though that's only practical with clear beer in a corny keg or similar).
NURSE!! He's out of bed again!

JBK on Facebook
JBK on Twitter

User avatar
LeeH
Under the Table
Posts: 1921
Joined: Wed Jan 11, 2012 9:42 pm
Location: North Lincs
Contact:

Re: Carbonation Pressure/Temperature Chart

Post by LeeH » Sun Nov 04, 2018 2:40 pm

This is a nice carb chart.

http://jollygoodbeer.co.uk/wp-content/u ... or_CO2.pdf


Sent from my iPad using Tapatalk Pro
Sabro Single Hop NEIPA 25/02/20 CLICK ME to monitor progress with Brewfather & iSpindel

User avatar
Kev888
So far gone I'm on the way back again!
Posts: 7701
Joined: Fri Mar 19, 2010 6:22 pm
Location: Derbyshire, UK

Re: Carbonation Pressure/Temperature Chart

Post by Kev888 » Mon Nov 05, 2018 6:16 pm

j444fog wrote:
Sun Nov 04, 2018 10:30 am
This might be a daft question, but how long do you need to keep the CO2 pressure on at the set temperature to get the level of carbonation you want?
As Jim mentioned, it varies but will often take a few to several days. However, the charts are the maximum carbonation that will be reached (i.e. if left for ever) so you won't go over if leaving for longer (unless the yeast are still going, anyway).

If you're worried about gas leaks you can just keep topping the pressure up rather than leaving it turned on all the time, but it does need to be frequent enough to keep the pressure about right or else it'll take longer to carbonate.

There is a different method where a much higher pressure is used (and often the keg shaken around too), to get gas in there more quickly. But then time is important as if left too long it will over-carbonate.
Kev

Fastline
Hollow Legs
Posts: 423
Joined: Tue Jan 06, 2015 8:38 pm
Location: Eltham London

Re: Carbonation Pressure/Temperature Chart

Post by Fastline » Mon Nov 05, 2018 10:18 pm

Are you guys leaving the cylinder of co2 open for the 3 or 4 days to carb or do you just get it up to pressure and shut it down.

User avatar
Kev888
So far gone I'm on the way back again!
Posts: 7701
Joined: Fri Mar 19, 2010 6:22 pm
Location: Derbyshire, UK

Re: Carbonation Pressure/Temperature Chart

Post by Kev888 » Mon Nov 05, 2018 11:04 pm

You need to either keep the gas on, or if you prefer to turn it off then keep turning on again briefly and frequently to top up. Otherwise the pressure will drop as CO2 gets taken into the beer, and you won't reach the levels intended.
Kev

User avatar
Jim
Site Admin
Posts: 10250
Joined: Sun Aug 22, 2004 1:00 pm
Location: Washington, UK

Re: Carbonation Pressure/Temperature Chart

Post by Jim » Tue Nov 06, 2018 8:52 am

I never leave the gas on permanently - too much danger of losing the whole bottle via a leak.

I just top up regularly.
NURSE!! He's out of bed again!

JBK on Facebook
JBK on Twitter

Post Reply