Cheap hop spider
-
- Even further under the Table
- Posts: 2999
- Joined: Wed May 09, 2012 6:42 pm
- Location: Warrington England usually drunk or being mithered by my 2yr old or wife
Cheap hop spider
Whilst looking thru ebay I noticed this
http://m.ebay.co.uk/itm/301953880886
Doesn't tell ypu the grade of stainless. Might be worth a punt.
My pan is 50cm high so I'd need to make it taller some how
http://m.ebay.co.uk/itm/301953880886
Doesn't tell ypu the grade of stainless. Might be worth a punt.
My pan is 50cm high so I'd need to make it taller some how
- Hairybiker
- Hollow Legs
- Posts: 350
- Joined: Tue Oct 14, 2014 10:28 am
Re: Cheap hop spider
That is an excellent price, usually the p&p is more than that.
Re: Cheap hop spider
Demig just had one of these delivered from aliexpress, apparently a bit flimsy but we will know how well it works next Sunday. I just bought an extortionately expensive BAC one for the Braumeister and it is beautifully made but it will be interesting to compare the two and how much if any they stifle the boil inside and ease of cleaning.
-
- Even further under the Table
- Posts: 2999
- Joined: Wed May 09, 2012 6:42 pm
- Location: Warrington England usually drunk or being mithered by my 2yr old or wife
Re: Cheap hop spider
Abit flimsy I can deal with as it will only get about 20g of hops in there
- alexlark
- Under the Table
- Posts: 1403
- Joined: Thu May 02, 2013 12:29 pm
- Location: Rhondda, South Wales
Re: Cheap hop spider
At that price you can use 2 in the boil!
-
- Even further under the Table
- Posts: 2999
- Joined: Wed May 09, 2012 6:42 pm
- Location: Warrington England usually drunk or being mithered by my 2yr old or wife
Re: Cheap hop spider
As for making it taller I was thinking of just hanging it with s/s wire
- Hairybiker
- Hollow Legs
- Posts: 350
- Joined: Tue Oct 14, 2014 10:28 am
Re: Cheap hop spider
Just looking at the pics, the, last one, shows the dimensionssbond10 wrote: My pan is 50cm high so I'd need to make it taller some how
35cm deep with the handle being ~10cm so nearly the 50cm you wanted.
-
- Lost in an Alcoholic Haze
- Posts: 638
- Joined: Tue Jan 06, 2015 2:12 pm
Re: Cheap hop spider
ive ordered the very same one, although from a different seller at a little bit more cost , just to give pellets a try really but if it works well enough ill probably buy a 'proper' one for all my brewing.
-
- Even further under the Table
- Posts: 2999
- Joined: Wed May 09, 2012 6:42 pm
- Location: Warrington England usually drunk or being mithered by my 2yr old or wife
Re: Cheap hop spider
Cheers hairy biker I took the 35cm as total height I think I was slightly tipsy at the time.
Think I'll Deffo be ordering one or 2 look much easier to clean.
Think I'll Deffo be ordering one or 2 look much easier to clean.
Re: Cheap hop spider
Very interested to hear how these perform in a brew: if they work well they are cheap enough to buy a pair and spread the hops out!
Re: Cheap hop spider
The ebay listing gives the mesh size as both '300 mesh' and '300 microns'. These are different amounts, right?
-
- Lost in an Alcoholic Haze
- Posts: 638
- Joined: Tue Jan 06, 2015 2:12 pm
Re: Cheap hop spider
i think the 'mesh' bit is just so it comes up in a wider search
Re: Cheap hop spider
Should be fine for you as the handle is long. It was very crushed when it arrived but it's flimsy to bend back into shape. Will find out how it works on Sunday and report back!Hairybiker wrote:Just looking at the pics, the, last one, shows the dimensionssbond10 wrote: My pan is 50cm high so I'd need to make it taller some how
35cm deep with the handle being ~10cm so nearly the 50cm you wanted.
Sent from my E2303 using Tapatalk
-
- Even further under the Table
- Posts: 2999
- Joined: Wed May 09, 2012 6:42 pm
- Location: Warrington England usually drunk or being mithered by my 2yr old or wife
Re: Cheap hop spider
I'll await your report before clicking buy thendemig wrote:Should be fine for you as the handle is long. It was very crushed when it arrived but it's flimsy to bend back into shape. Will find out how it works on Sunday and report back!Hairybiker wrote:Just looking at the pics, the, last one, shows the dimensionssbond10 wrote: My pan is 50cm high so I'd need to make it taller some how
35cm deep with the handle being ~10cm so nearly the 50cm you wanted.
Sent from my E2303 using Tapatalk
-
- Telling imaginary friend stories
- Posts: 5229
- Joined: Sun Oct 16, 2011 1:49 pm
- Location: Cowley, Oxford
Re: Cheap hop spider
as a hop spider fan boy i find little/no difference in hop utilisation but i do recirculate the boil back into the hopspider.. fwiw i pad £40 for a similar though much more robust SS mesh if i had seen this i think it would have been fine instead good find..
ist update for months n months..
Fermnting: not a lot..
Conditioning: nowt
Maturing: Challenger smash, and a kit lager
Drinking: dry one minikeg left in the store
Coming Soon Lots planned for the near future nowt for the immediate
Fermnting: not a lot..
Conditioning: nowt
Maturing: Challenger smash, and a kit lager
Drinking: dry one minikeg left in the store
Coming Soon Lots planned for the near future nowt for the immediate