Im about ready to start putting my elements into my boiler but Id just like to check with those in the know on which wires I should be snipping/joining.
I was presuming if I want to bypass the switch I just connect the two brown wires and remove the black one to disable the auto cutoff
But on closer inspection of the switch section it shows the black wire to be feeding the led
So what do I have to do to disable the auto shut off ?
Cheers
Jim
Tesco Kettle Question on wiring
Re: Tesco Kettle Question on wiring
hi
connect the two brown wires together and pull out the black one. this will bypass the switch but will keep the boil dry cut off there so you are protected. i did this with my two tesco kettles and all is working fine.
lewis
connect the two brown wires together and pull out the black one. this will bypass the switch but will keep the boil dry cut off there so you are protected. i did this with my two tesco kettles and all is working fine.
lewis
- floydmeddler
- Telling everyone Your My Best Mate
- Posts: 4160
- Joined: Mon Feb 16, 2009 10:37 pm
- Location: Irish man living in Brighton
Re: Tesco Kettle Question on wiring
I did this too.