I fancy doing some bottles next and would like to get a bottle washing attachment to make rinsing somewhat easier. Trouble is they all seem to require taps with threaded ends and I am limited a normal domestic kitchen mixer tap (with a swively bit where both hot and cold water comes out).
I've seen an adapter on a US web site that screws into the end of the mixer unit and allows the washing unit to screw on as normal. Does anyone know where in the UK I can get one or have any other ideas to make rinsing less of a drag?
Bottle Washer
Re: Bottle Washer
I have a Hozelock attachment that screws down onto my kitchen tap and allows the attachment of a standard Hozelock quick-connect fitting. Maybe one of those would be of use?
http://www.hozelock.com/watering/hose-f ... ctors.html
I have the 2274 version.
http://www.hozelock.com/watering/hose-f ... ctors.html
I have the 2274 version.
- yashicamat
- Under the Table
- Posts: 1014
- Joined: Wed Oct 15, 2008 8:04 pm
- Location: Stockport
Re: Bottle Washer
Most outside taps you can unscrew the hozelock fitting and you have a threaded tap. I use this for my IC and run the line into the kitchen through the window.
Rob
POTTER BREWERY (mothballed 2020)
Fermenting: nowt (sadly). Drinking: still a few bottles of my imperial stout knocking about . . . it's rather good now
POTTER BREWERY (mothballed 2020)
Fermenting: nowt (sadly). Drinking: still a few bottles of my imperial stout knocking about . . . it's rather good now