Partial Birthday Present - Cornie kegs
-
- CBA Prizewinner 2010
- Posts: 7874
- Joined: Sun Nov 30, 2008 9:06 pm
- Location: Keighley, West Yorkshire
- Contact:
Partial Birthday Present - Cornie kegs
Its a little early, but my other half is paying for 1 Cornie while I paid for the rest of the setup... All bought from Norm.
This one is mine so I can open this one and play with it
Got the Pub-gas for £18, reads 600psi in the cylinder is that the usual???
Quick disconnect and Tap:
Packing!!!
This one is mine so I can open this one and play with it
Got the Pub-gas for £18, reads 600psi in the cylinder is that the usual???
Quick disconnect and Tap:
Packing!!!
Re: Partial Birthday Present - Cornie kegs
Very nice! I have asked swmbo if I can have the same setup for my birthday next month and she has agreed so thanks for putting the photos up, by the way if I am not being too nosey what did you pay for it all?
Cheers,
Jules
Cheers,
Jules
-
- CBA Prizewinner 2010
- Posts: 7874
- Joined: Sun Nov 30, 2008 9:06 pm
- Location: Keighley, West Yorkshire
- Contact:
Re: Partial Birthday Present - Cornie kegs
£166 + £18 for the co2
Not that cheap, but hopefully all stuff that will last me years
Not that cheap, but hopefully all stuff that will last me years
Re: Partial Birthday Present - Cornie kegs
Thanks for the info pdtnc I cant wait to have a play!
Cheers,
Jules
Cheers,
Jules
Re: Partial Birthday Present - Cornie kegs
Looks great - have fun with it!
On the pressure, 600 psi is just fine. CO2 bottles normally read around 50 Bar (700 psi) at 20C, but a bit lower if the temperature is low. Mine reads about 42 bar at the moment, which is about 600 psi as well....
The bottle pressure will change a bit with temp, but it won't really go much lower than that until it's almost completely empty. Then it will drop really quickly.
On the pressure, 600 psi is just fine. CO2 bottles normally read around 50 Bar (700 psi) at 20C, but a bit lower if the temperature is low. Mine reads about 42 bar at the moment, which is about 600 psi as well....
The bottle pressure will change a bit with temp, but it won't really go much lower than that until it's almost completely empty. Then it will drop really quickly.
Re: Partial Birthday Present - Cornie kegs
Is this your first Corny PDTNC? If so you'll love it. Ive just got exactly the same setup up and running and it is amazing.....sod going to the pub!
Re: Partial Birthday Present - Cornie kegs
pdtnc wrote:£166 + £18 for the co2
Not that cheap, but hopefully all stuff that will last me years
nice looking mate
this is my next purchase too.
what exactly did you get for the money? I need to start finding the cash.
Tap
Cornie x 1
Gas Reg
???
-
- CBA Prizewinner 2010
- Posts: 7874
- Joined: Sun Nov 30, 2008 9:06 pm
- Location: Keighley, West Yorkshire
- Contact:
Re: Partial Birthday Present - Cornie kegs
Cheers for the info ADM, most appreciated
Crookedeyeboy, yep, my first, got a pair so they wouldn't be lonely
Chris, here's what Norman wrote:
Crookedeyeboy, yep, my first, got a pair so they wouldn't be lonely
Chris, here's what Norman wrote:
Both kegs arrived with some pressure in them, I'm going to go and have a bit of a clean out now as they seem to have a bit of cleaner or something left in them.A SINGLE REG WITH "T" PIECES IS FINE AND YOU CAN "T" OFF AS MANY TIMES AS YOU WANT WITHOUT LOSS OFF PRESSURE ,ON THE PICTURE I SENT OF THE SINGLE REG THE AJUSTER IS THE CHROME SCREW ON THE FRONT OF THE REG OK SO
2 KEGS ALL PIPE AND FITTINGS IS £93
1 NEW CO2 SINGLE REG WITH TWIN TAKE OFF £35
1 NEW CHROME TAP £33 [NO DISCONNECT ] WITH DISCO £38
TOTAL INC P&P £161
THANKS
NORMAN
Re: Partial Birthday Present - Cornie kegs
Make sure you fully take them to pieces. Got mine from Norm and one of the posts was full of old hops!
-
- CBA Prizewinner 2010
- Posts: 7874
- Joined: Sun Nov 30, 2008 9:06 pm
- Location: Keighley, West Yorkshire
- Contact:
Re: Partial Birthday Present - Cornie kegs
yeah, I've noticed the Out and In posts are in the wrong places...
Just done a leak test and one of the pressure releifs on the lid is passing, hoping to get it replaced.
Poppet's in the middle of the posts took a quick squirt to get them to seal, so maybe they need cleaning out as you say, what size spanner fits the weird nut side?
Just done a leak test and one of the pressure releifs on the lid is passing, hoping to get it replaced.
Poppet's in the middle of the posts took a quick squirt to get them to seal, so maybe they need cleaning out as you say, what size spanner fits the weird nut side?
-
- CBA Prizewinner 2010
- Posts: 7874
- Joined: Sun Nov 30, 2008 9:06 pm
- Location: Keighley, West Yorkshire
- Contact:
Re: Partial Birthday Present - Cornie kegs
You'll not look back man. Got my 1st 2 cornies from norm in August, barley bottled anything since You'll be getting more before you know it! out of interest did you get the CO2 from the gas products place down Leeds Road, Bradford?
-
- CBA Prizewinner 2010
- Posts: 7874
- Joined: Sun Nov 30, 2008 9:06 pm
- Location: Keighley, West Yorkshire
- Contact:
Re: Partial Birthday Present - Cornie kegs
The gas came from keighley, towler and stains is the shop. How much do you pay for your gas?