[quote=Jambo post_id=816009 time=1494411962 user_id=1734]
Decided it was the last time it was doing this so I was going to bypass the thermal cut out. Per Kernelm's note above this means bypassing the whole thermostat assembly but it's as much use as a chocolate teapot anyway. Two screws out on the underside, spade connector from the downstream side of the thermotsat chopped and into the block connector and job done.
[/quote]
Hi Jambi, I'm having the same problem with my brupaks boiler. I don't suppose you can post a photo of your modified wiring for me to copy could you? I'm not much of an electrician haha!! Thanks in advance
Brupaks Boiler keeps cutting out!!
-
- Tippler
- Posts: 18
- Joined: Sat Dec 02, 2017 9:46 pm
Re: Brupaks Boiler keeps cutting out!!
Afraid I don't Phil, but if you open yours up and take a photo I'll annotate what to do.
However, as discussed in this thread, did you try just removing the false bottom to see if that improves things?
However, as discussed in this thread, did you try just removing the false bottom to see if that improves things?
-
- Tippler
- Posts: 18
- Joined: Sat Dec 02, 2017 9:46 pm
Re: Brupaks Boiler keeps cutting out!!
Thanks for the reply, mine didn’t come with a false bottom.
I took the bottom off to remove the element and give it a better clean on the weekend. Meanwhile had a sneaky look at the wiring. I think I might know what to do, but if you don’t mind I’ll take a photo when I get a chance and ask you questions
Sent from my iPhone using Tapatalk
I took the bottom off to remove the element and give it a better clean on the weekend. Meanwhile had a sneaky look at the wiring. I think I might know what to do, but if you don’t mind I’ll take a photo when I get a chance and ask you questions
Sent from my iPhone using Tapatalk
-
- Tippler
- Posts: 18
- Joined: Sat Dec 02, 2017 9:46 pm
Re: Brupaks Boiler keeps cutting out!!
Jambo wrote:Afraid I don't Phil, but if you open yours up and take a photo I'll annotate what to do.
However, as discussed in this thread, did you try just removing the false bottom to see if that improves things?
Hi Jambo,
It appears I figured it out, see the picture of how I rewired the boiler.
Tested it with a couple of litres of water seems to work ok....
Re: Brupaks Boiler keeps cutting out!!
Good stuff Phil, hope it works better for you now.