Yet another Thermobox mash tun

The forum for discussing all kinds of brewing paraphernalia.
User avatar
mozza
Under the Table
Posts: 1031
Joined: Thu Jan 31, 2013 7:58 pm
Location: Essex

Re: Yet another Thermobox mash tun

Post by mozza » Thu Aug 03, 2017 6:14 pm

Kev888 wrote:Good stuff, looks much cheaper than the starrett ones yet more or less the same kind of thing. I guess if it works as well as you say then it would be fine for occasional homebrew use :)
Yeah don't know how many holes it would make before the teeth go blunt but it managed two in mine no problem
Cheers and gone,

Mozza

naturals

Re: Yet another Thermobox mash tun

Post by naturals » Mon Aug 07, 2017 9:15 am

mozza wrote:
naturals wrote:Thanks for the reply Kev. Looking at the price of those cutters (likely to be £30+ with delivery for the size I need) I think I'll give it a shot with the Dremel.
I took a punt on one of these and it was brilliant. Just lubricate with some wd40 and it goes through in about 10 seconds
Thanks for the heads up mozza - ordered. Hoping to make a video of the conversion and upload to Youtube (all the Photobucket threads are doing my head in).

naturals

Re: Yet another Thermobox mash tun

Post by naturals » Thu Sep 14, 2017 10:39 am

Finally finished the thing. Video below. Thanks all for your help in getting this build off the ground!


WalesAles
Falling off the Barstool
Posts: 3899
Joined: Thu Jan 24, 2013 11:07 pm
Location: South Wales UK.

Re: Yet another Thermobox mash tun

Post by WalesAles » Thu Sep 14, 2017 5:29 pm

nat,
Great vid, great build, very nice and tidy! =D>
How the hell do you get your hands to move so fast, holding tools and all?
Are you drinking TC? :D

WA

Sent drinking a Rasp and Cran TC, 3rd place HBF2017.

User avatar
jmc
Even further under the Table
Posts: 2486
Joined: Thu May 13, 2010 11:43 pm
Location: Swaledale, North Yorkshire

Re: Yet another Thermobox mash tun

Post by jmc » Tue Oct 10, 2017 1:55 am

Nice video.
Have you used is yet?

naturals

Re: Yet another Thermobox mash tun

Post by naturals » Tue Oct 10, 2017 3:07 pm

No, just trying to sort out a false bottom. Ordered one from HBB but the size was a little out. I'll get a "brewery tour" up on YT once I have it all working.

User avatar
mozza
Under the Table
Posts: 1031
Joined: Thu Jan 31, 2013 7:58 pm
Location: Essex

Re: Yet another Thermobox mash tun

Post by mozza » Tue Oct 10, 2017 3:39 pm

Cracking video, wish you'd made this before I did mine anyone following this will have a stress free experience lol!
Cheers and gone,

Mozza

sbond10
Even further under the Table
Posts: 2999
Joined: Wed May 09, 2012 6:42 pm
Location: Warrington England usually drunk or being mithered by my 2yr old or wife

Re: Yet another Thermobox mash tun

Post by sbond10 » Tue Oct 10, 2017 4:29 pm

What cutting blade you using on dremel ?

Post Reply