Hi,
Sorry if this is duplicated elsewhere but searching for Sparklets on the forum gives umpteen results!
I have got 3 1970's vintage brown Sparklets pressure barrels that need fettling. Taps are standard types but caps need large 6 inch O rings which don't seem to be used anymore.
Has anyone found a non-brewing source for this size ring. One barrel came with a homemade ring made from a length of syphon tube. So they must have been pretty chunky.
Cheers, Mike Davis
Sparklets Barrels
How about 6" pipe O rings?
Not sure where you would get them from as spares, but if you could find some unused drainage pipe it may just fit nicely! Quite a lot of less than ideal builders will remove the O rings to make the pipe slot together easier, so it may be you could obtain some from a building site by asking the workers
Or make up your own...
http://www.altecweb.com/home.asp?cat=Subcategory8230
Not sure where you would get them from as spares, but if you could find some unused drainage pipe it may just fit nicely! Quite a lot of less than ideal builders will remove the O rings to make the pipe slot together easier, so it may be you could obtain some from a building site by asking the workers
Or make up your own...
http://www.altecweb.com/home.asp?cat=Subcategory8230