I have a couple of really neat half inch barbs with a short thread and silicone washer on them. Very useful for popping on and off as you can finger tighten them to seal.
Has anyone spotted them for sale anywhere? I've combed eBay etc. Thanks!
Any idea where I can buy these?.....
- donchiquon
- Hollow Legs
- Posts: 346
- Joined: Mon Feb 01, 2016 9:46 pm
- Location: Chamonix-Mont-Blanc, France
Re: Any idea where I can buy these?.....
Theres one here http://www.aquatuning.co.uk/water-cooli ... ing?c=2668 but its brass don't know if thats OK for your use or not.
- Dennis King
- Telling everyone Your My Best Mate
- Posts: 4227
- Joined: Sat Aug 11, 2007 7:52 pm
- Location: Pitsea Essex
Re: Any idea where I can buy these?.....
Or here in stainless without the seal http://www.ebay.co.uk/itm/Male-Thread-P ... 2222447360
- orlando
- So far gone I'm on the way back again!
- Posts: 7197
- Joined: Thu Nov 17, 2011 3:22 pm
- Location: North Norfolk: Nearest breweries All Day Brewery, Salle. Panther, Reepham. Yetman's, Holt
Re: Any idea where I can buy these?.....
Contact Brewbuilder too.
I am "The Little Red Brooster"
Fermenting:
Conditioning:
Drinking: Southwold Again,
Up Next: John Barleycorn (Barley Wine)
Planning: Winter drinking Beer
Fermenting:
Conditioning:
Drinking: Southwold Again,
Up Next: John Barleycorn (Barley Wine)
Planning: Winter drinking Beer
- donchiquon
- Hollow Legs
- Posts: 346
- Joined: Mon Feb 01, 2016 9:46 pm
- Location: Chamonix-Mont-Blanc, France
Re: Any idea where I can buy these?.....
Thanks all
@simon12 If possible I'd like to go for SS and the aquatuning ones are brass - although they are the closest in form to the ones I have.
The Maltmiller and ebay ones have long threads as you say Dennis, and all of my existing long thread versions need PTFE and a spanner to get a decent seal.
I'll check with Brewbuilder - good idea Orlando.
I've scoured loads of sites including all the usual suspects and can't find anything like them. They are a great design.
@simon12 If possible I'd like to go for SS and the aquatuning ones are brass - although they are the closest in form to the ones I have.
The Maltmiller and ebay ones have long threads as you say Dennis, and all of my existing long thread versions need PTFE and a spanner to get a decent seal.
I'll check with Brewbuilder - good idea Orlando.
I've scoured loads of sites including all the usual suspects and can't find anything like them. They are a great design.
Ian
Re: Any idea where I can buy these?.....
Blichman do something similar but it's a female thread, quite expensive for what it is though.
https://www.brewuk.co.uk/blichmann-quick.html
https://www.brewuk.co.uk/blichmann-quick.html
- donchiquon
- Hollow Legs
- Posts: 346
- Joined: Mon Feb 01, 2016 9:46 pm
- Location: Chamonix-Mont-Blanc, France
Re: Any idea where I can buy these?.....
£12! Ouch!chris246810 wrote:Blichman do something similar but it's a female thread, quite expensive for what it is though.
https://www.brewuk.co.uk/blichmann-quick.html
I can't believe how elusive these things are to track down.
Ian