Beersmith:where to find mash liquor quantity
Beersmith:where to find mash liquor quantity
I'm feeling my way around Beersmith 2 on me iPad but can't find where the mash liquor is on any recipe. Anyone know?
Re: Beersmith:where to find mash liquor quantity
If you're using the mobile version of the software, you have to pick the 'Timer' tab at the top (next to 'View'). That will show you how much mash liquor to add and at what temperature.
If you're not pre-heating the mash tun make sure you go into edit mode, then to the mash profile settings (the little gear icon) and check 'adjust temp for equipment'. Otherwise you'll be several degrees below your target. I found that out the hard way.
The timer function is pretty useful. Just start it going and it tells you when you next need to do something. Not difficult for a mash, but for the boil it can be very helpful.
If you're not pre-heating the mash tun make sure you go into edit mode, then to the mash profile settings (the little gear icon) and check 'adjust temp for equipment'. Otherwise you'll be several degrees below your target. I found that out the hard way.
The timer function is pretty useful. Just start it going and it tells you when you next need to do something. Not difficult for a mash, but for the boil it can be very helpful.
Fermenting: AG#22 San Diego IPA
Drinking: Probably.
Drinking: Probably.
Re: Beersmith:where to find mash liquor quantity
That's great, thanks very much.