"Loc-line" for recirculating mash?

The forum for discussing all kinds of brewing paraphernalia.
Post Reply
User avatar
Norik
Piss Artist
Posts: 128
Joined: Fri Jul 04, 2008 8:36 pm

"Loc-line" for recirculating mash?

Post by Norik » Fri Jun 09, 2017 8:50 pm

Does anyone here use Loc-line when recirculating your mash? I'm thinking of trying it out.
Litany For Beer
I must drink the Beer.
Beer is the mind-killer.
Beer is the little-death that brings total obliteration.
I will face my Beer.
I will permit it to pass over me and through me.
And when it has gone past I will turn the inner eye to see its path.
Where the Beer has gone there will be nothing.
Only I will remain.



Hitchens's Razor:
"What can be asserted without evidence can be dismissed without evidence."

ciderhead
Piss Artist
Posts: 239
Joined: Sun Jul 29, 2012 12:18 am
Location: Emerald Isle

Re: "Loc-line" for recirculating mash?

Post by ciderhead » Fri Jun 09, 2017 10:41 pm

There's a home brew shop that sells it for that purpose, I've seen it in action, issues are small bits of husk getting stuck in jets but as recirc yep good

Secla
Lost in an Alcoholic Haze
Posts: 637
Joined: Thu Dec 04, 2008 1:26 am

Re: "Loc-line" for recirculating mash?

Post by Secla » Fri Jun 09, 2017 11:05 pm

i tryed one for sparging and it didnt work great as unless you had the pump going full blast it didnt make it to the end holes

ciderhead
Piss Artist
Posts: 239
Joined: Sun Jul 29, 2012 12:18 am
Location: Emerald Isle

"Loc-line" for recirculating mash?

Post by ciderhead » Fri Jun 09, 2017 11:08 pm

Was going to say you need a good flow as well

republicofbeer

Re: "Loc-line" for recirculating mash?

Post by republicofbeer » Sun Jun 11, 2017 1:19 pm

Image

Its what I've been using. However, I'm going to replace it with something else. Its a great idea but the holes are too big so the flow has to be too fast to get it to all the holes.


Sent from my iPhone using Tapatalk

Haydnexport
Lost in an Alcoholic Haze
Posts: 637
Joined: Tue Jan 06, 2015 2:12 pm

Re: "Loc-line" for recirculating mash?

Post by Haydnexport » Sun Jun 11, 2017 1:29 pm

can you not rotate the first ones up so they receive the water later?

republicofbeer

Re: "Loc-line" for recirculating mash?

Post by republicofbeer » Sun Jun 11, 2017 4:02 pm

I've tried all rotations etc, but no. The holes are just too big.


Sent from my iPhone using Tapatalk

User avatar
Norik
Piss Artist
Posts: 128
Joined: Fri Jul 04, 2008 8:36 pm

Re: "Loc-line" for recirculating mash?

Post by Norik » Sun Jun 11, 2017 5:07 pm

Thanks for the firsthand experience.
Litany For Beer
I must drink the Beer.
Beer is the mind-killer.
Beer is the little-death that brings total obliteration.
I will face my Beer.
I will permit it to pass over me and through me.
And when it has gone past I will turn the inner eye to see its path.
Where the Beer has gone there will be nothing.
Only I will remain.



Hitchens's Razor:
"What can be asserted without evidence can be dismissed without evidence."

sbond10
Even further under the Table
Posts: 2999
Joined: Wed May 09, 2012 6:42 pm
Location: Warrington England usually drunk or being mithered by my 2yr old or wife

Re: "Loc-line" for recirculating mash?

Post by sbond10 » Sun Jun 11, 2017 6:14 pm

Doesnt angel homebrew sell these or his different

republicofbeer

Re: "Loc-line" for recirculating mash?

Post by republicofbeer » Sun Jun 11, 2017 6:33 pm

Yes, I got mine from angel. I tried a rotating sparge arm first and that sprayed wort everywhere. I think I'm going to get a stainless steel ring and drill it. Every off the shelf item hasn't worked well for me, but my mash tun is 200ltr so it may work better on smaller vessels


Sent from my iPhone using Tapatalk

User avatar
Norik
Piss Artist
Posts: 128
Joined: Fri Jul 04, 2008 8:36 pm

Re: "Loc-line" for recirculating mash?

Post by Norik » Sun Jun 11, 2017 11:40 pm

What pump are you using?
Litany For Beer
I must drink the Beer.
Beer is the mind-killer.
Beer is the little-death that brings total obliteration.
I will face my Beer.
I will permit it to pass over me and through me.
And when it has gone past I will turn the inner eye to see its path.
Where the Beer has gone there will be nothing.
Only I will remain.



Hitchens's Razor:
"What can be asserted without evidence can be dismissed without evidence."

ciderhead
Piss Artist
Posts: 239
Joined: Sun Jul 29, 2012 12:18 am
Location: Emerald Isle

"Loc-line" for recirculating mash?

Post by ciderhead » Mon Jun 12, 2017 12:21 am

I spose you could block some with food grade silicone or take them out with standard loc line connections?

republicofbeer

Re: "Loc-line" for recirculating mash?

Post by republicofbeer » Mon Jun 12, 2017 9:18 am

I'm using TD5 mag pumps.

Yes I think the best solution may be to take some out. I was thinking of making mine a complete ring and putting another pump feed the other side.


Sent from my iPhone using Tapatalk

Matt in Birdham
Drunk as a Skunk
Posts: 764
Joined: Thu Oct 08, 2015 10:27 pm

Re: "Loc-line" for recirculating mash?

Post by Matt in Birdham » Mon Jun 12, 2017 10:40 pm

I use a ring of 1/2 inch silicon hose with some holes drilled in it for my HERMS recirc. Works very well, with a bit of flexibility in design (e.g. drill as many holes as you want, whatever size you want). I also find it rests nicely on top of the mash, so it adjusts to various mash sizes without too much bother. Cheap and cheerful as well, which is nice - just a bit of hose and a copper T:

Image

Image

Post Reply