Hi all,
My home built temp control system using an stc1000 has stopped working (display shot!) and i was thinking about buying one of the off the shelf Inkbird units for heating and cooling.
I have currently got a small temperature probe which i attach to the outside of the FV and would like to keep it that way as its worked ok so far.
Any recommendations on which unit people have bought?
Cheers
inkbird
Re: inkbird
This one would would be a direct replacement (£24.29)
https://www.amazon.co.uk/Inkbird-Temper ... ds=inkbird
This one if you decide you want the sensor in the beer instead.
https://www.amazon.co.uk/Inkbird-Temper ... ds=inkbird
edit:
I use the first one. It works.
https://www.amazon.co.uk/Inkbird-Temper ... ds=inkbird
This one if you decide you want the sensor in the beer instead.
https://www.amazon.co.uk/Inkbird-Temper ... ds=inkbird
edit:
I use the first one. It works.
Re: inkbird
I got the second one, but both look good. Very happy with it
- Dennis King
- Telling everyone Your My Best Mate
- Posts: 4227
- Joined: Sat Aug 11, 2007 7:52 pm
- Location: Pitsea Essex
Re: inkbird
My stc100 recently died and I bought an inkbird, the 308, impressed.
- alexlark
- Under the Table
- Posts: 1403
- Joined: Thu May 02, 2013 12:29 pm
- Location: Rhondda, South Wales
Re: inkbird
I built a second STC for my fermentation fridge and then immediately replaced it with a DIY BrewPi. Lately I'm spending more time fiddling with the BrewPi than actually brewing!
Re: inkbird
Hi,
If anyone need an Inkbird ITC-308, join the prime offer now.
Price: £19.43
Prime Offer time: 12th,July, 2017 (8:00 am‐12 :00),4 hours.
If anyone need an Inkbird ITC-308, join the prime offer now.
Price: £19.43
Prime Offer time: 12th,July, 2017 (8:00 am‐12 :00),4 hours.