A kind member sent me some 3/4 type c Cam lock which by looks of it have been mis stamped with 1/2 inch. So looking for a type a cam in 3/4 as cheap as poss.
I'm planning on buying a topflo mini pump these so these have 1/2 openings so if I use a 1/2 to 3/4 Bush then the bigger cam type on top this should work shouldn't it ?
Cheers sean
Cheapest place for type a 3/4 Cam locks
- Kev888
- So far gone I'm on the way back again!
- Posts: 7701
- Joined: Fri Mar 19, 2010 6:22 pm
- Location: Derbyshire, UK
Re: Cheapest place for type a 3/4 Cam locks
Yes if the pump has 1/2" BSP male threads then a 1/2" BSP to 3/4" BSP reducing bush should work with 3/4" BSP type A camlocks. Even if the pump has 1/2" NPT male threads it would likely work.
Though what with bushes, bigger camlocks and hoses, the pump will end up with some weighty stuff dangling off its little 1/2" threads, so you may want to make sure no undue stresses are applied via tugging the hoses and so on.
Can't help with cheap places for small numbers of camlocks, but be sure you buy BSP camlocks if you want to use a BSP bush. NPT (common with US and Chinese sellers) is by coincidence just about compatible with BSP at 1/2", but is not at 3/4".
Though what with bushes, bigger camlocks and hoses, the pump will end up with some weighty stuff dangling off its little 1/2" threads, so you may want to make sure no undue stresses are applied via tugging the hoses and so on.
Can't help with cheap places for small numbers of camlocks, but be sure you buy BSP camlocks if you want to use a BSP bush. NPT (common with US and Chinese sellers) is by coincidence just about compatible with BSP at 1/2", but is not at 3/4".
Kev
-
- Even further under the Table
- Posts: 2999
- Joined: Wed May 09, 2012 6:42 pm
- Location: Warrington England usually drunk or being mithered by my 2yr old or wife
Re: Cheapest place for type a 3/4 Cam locks
Cheers kev I saw some for around 4 quid but they where from chinos and no mention of witch thread they are
-
- Even further under the Table
- Posts: 2999
- Joined: Wed May 09, 2012 6:42 pm
- Location: Warrington England usually drunk or being mithered by my 2yr old or wife
Re: Cheapest place for type a 3/4 Cam locks
Just wondered if you could get a type a with a 3/4 head and a 1/2 bottom end