Barrel caps
Barrel caps
Hello, new member here. I've got a 2" pressure cap with a S30 valve fitted to my barrel but without a piercing pin, how do I get the co2 into the barrel?
Re: Barrel caps
Use an S30 gas cylinder and follow the instructions. Remember to remove it after each time you inject gas.Nellymac69 wrote: ↑Tue Feb 13, 2018 5:51 pmHello, new member here. I've got a 2" pressure cap with a S30 valve fitted to my barrel but without a piercing pin, how do I get the co2 into the barrel?
"You're not drunk if you can lie on the floor without holding on." Dean Martin
1. Life is not a journey to the grave with the intention of arriving safely in a pretty and well-preserved body, but rather to skid in sideways, thoroughly used, totally worn out and loudly proclaiming... "f*ck, what a trip
It's better to lose time with friends than to lose friends with time (Portuguese proverb)
Alone we travel faster
Together we travel further
( In an admonishing email from our golf club)
1. Life is not a journey to the grave with the intention of arriving safely in a pretty and well-preserved body, but rather to skid in sideways, thoroughly used, totally worn out and loudly proclaiming... "f*ck, what a trip
It's better to lose time with friends than to lose friends with time (Portuguese proverb)
Alone we travel faster
Together we travel further
( In an admonishing email from our golf club)
Re: Barrel caps
Ok, I'll give that a go. The only other way is to wait for my other barrel to empty and use the cap from that one (which is fitted with a piercing pin). Thanks for the advice.
- Eric
- Even further under the Table
- Posts: 2873
- Joined: Fri Mar 13, 2009 1:18 am
- Location: Sunderland.
Re: Barrel caps
Many of those S30 valves are dual purpose. An "O" ring holds in the receptor which is reversable, having a pin on one side and none on the other.
Without patience, life becomes difficult and the sooner it's finished, the better.
Re: Barrel caps
Never thought of that, I'll look at that when I get home. I'm new to this so I may well be back with other issues!