fermenter bucket recommendation
fermenter bucket recommendation
Looking to upgrade to larger brews after first successful first small brew. Considering a 30-33litre to allow space to brew typical 40pint cans. ideally don't want to use a syphon so considering one with a tap that accepts a bottling wand. Anyone got any recommendations of ones that don't leak and have firm lids?
- StrontiumDog
- Piss Artist
- Posts: 128
- Joined: Mon Mar 13, 2017 11:26 am
Re: fermenter bucket recommendation
Just get yourself a normal fermenting bucket from your LHBS, drill a hole and fit a spigot yourself. It's really easy. Use some lubricating gel on the spigot washers to ensure a nice seal and you're laughing (you can use Vaseline but it does degrade the rubber seals) 30 litre works nicely for normal 5 gallon brews. I had a slightly smaller one that was still recommended for 5 gal but the krausen would force the lid off and over spill so make sure you get one with enough room between your brew and the lid. Like I said though, 30-33 litre is fine. And make sure you put it at the right height to maximise how much you get out your FV whilst leaving all you trub.
I personally have gone back to a fermenting bucket without a spigot as I was seeing a lot of air caught in the spigot and wasn't sure how good that was for my brew. When I'm not kegging I still rack to a bottling bucket (my old smaller 5 gal bucket) that has a spigot and bottling wand attached so that I can batch prime but it's not my favourite way to do things (time, mess etc)
If you want to make life easier, get some corneys.
Hope this has helped a bit......
Jase
Sent from my SM-G920F using Tapatalk
I personally have gone back to a fermenting bucket without a spigot as I was seeing a lot of air caught in the spigot and wasn't sure how good that was for my brew. When I'm not kegging I still rack to a bottling bucket (my old smaller 5 gal bucket) that has a spigot and bottling wand attached so that I can batch prime but it's not my favourite way to do things (time, mess etc)
If you want to make life easier, get some corneys.
Hope this has helped a bit......
Jase
Sent from my SM-G920F using Tapatalk
Re: fermenter bucket recommendation
I use 33l buckets with white spigots just like the ones malt miller sells. I fitted the spigot as close to the bottom as I could. The sediment trap works great. Leave it hole side up for primary and hole side down for secondary. I use a silicone hose when transferring to avoid splashing and I never noticed it drawing any air. Never had an oxidised beer either.
I put the seal on the outside of the bucket and tighten by hand. I don't lube the seal, just put it on straight from the starsan bucket. I never had a spigot leak. The lids can be hit and miss. I have one bucket that leaks gas so bad that there's no activity in the blow off tube. While I know it's not really a problem I still avoid using it if I can. I like the bubbles. None of the other 4 buckets I have noticeable leaks. Get 2 buckets with spigots if you do one brew at a time or 3 if you want to run 2 at the same time.
That spigot works great with a bottling wand btw.
I put the seal on the outside of the bucket and tighten by hand. I don't lube the seal, just put it on straight from the starsan bucket. I never had a spigot leak. The lids can be hit and miss. I have one bucket that leaks gas so bad that there's no activity in the blow off tube. While I know it's not really a problem I still avoid using it if I can. I like the bubbles. None of the other 4 buckets I have noticeable leaks. Get 2 buckets with spigots if you do one brew at a time or 3 if you want to run 2 at the same time.
That spigot works great with a bottling wand btw.
- Trefoyl
- Even further under the Table
- Posts: 2520
- Joined: Mon Nov 09, 2009 5:28 pm
- Location: New Jersey
Re: fermenter bucket recommendation
I use the Speidel fermenter with chrome tap upgrade and love it. There are many third party attachments as well such as triclover fittings that I haven't looked into yet.
The lid screws on and is very quick and easy to remove, I use an airlock so I know it is very airtight. If I don't want to use an airlock I use a foam bung.
The lid screws on and is very quick and easy to remove, I use an airlock so I know it is very airtight. If I don't want to use an airlock I use a foam bung.
Sommeliers recommend that you swirl a glass of wine and inhale its bouquet before throwing it in the face of your enemy.
Re: fermenter bucket recommendation
I have a 60l speidel I used for other brewing. It's a great stuff but expensive. I used a second tap at the top with a tube as a blow off. Worked like a charm.