Stumbled upon this:
https://brew2bottle.co.uk/products/keg- ... -blue-prv
Question is... would it fit a corny keg? Looks like it might. I like to ferment in the keg sometimes and a 10psi pressure relive valve would come in very handy.
What's your thoughts?
Would this fit a corny keg?
- floydmeddler
- Telling everyone Your My Best Mate
- Posts: 4160
- Joined: Mon Feb 16, 2009 10:37 pm
- Location: Irish man living in Brighton
- Jocky
- Even further under the Table
- Posts: 2738
- Joined: Sat Nov 12, 2011 6:50 pm
- Location: Epsom, Surrey, UK
Re: Would this fit a corny keg?
Yeah, it looks identical to a Corny PRV except for the colour.
I would, however suggest that you only use this as a backup to a spunding valve on your corny keg. If one gets blocked or fails then you have the other as a backup.
I would, however suggest that you only use this as a backup to a spunding valve on your corny keg. If one gets blocked or fails then you have the other as a backup.
Ingredients: Water, Barley, Hops, Yeast, Seaweed, Blood, Sweat, The swim bladder of a sturgeon, My enemies tears, Scenes of mild peril, An otter's handbag and Riboflavin.
Re: Would this fit a corny keg?
I’m looking at a couple of cornie PRV spares as I write, and apart from the stronger spring they look very similar.floydmeddler wrote: ↑Mon Sep 19, 2022 6:56 pmStumbled upon this:
https://brew2bottle.co.uk/products/keg- ... -blue-prv
Question is... would it fit a corny keg? Looks like it might. I like to ferment in the keg sometimes and a 10psi pressure relive valve would come in very handy.
What's your thoughts?
My cornies tend to need 10 psi to create a seal with the lid, that’s with the more supple seals.
You may have to give the keg a burst of C02 to seal first, and I wonder how accurate it will be, but that probably won’t matter much.
Do you think it’s worth asking Brew2Bottle if it fits a cornie?
- floydmeddler
- Telling everyone Your My Best Mate
- Posts: 4160
- Joined: Mon Feb 16, 2009 10:37 pm
- Location: Irish man living in Brighton
Re: Would this fit a corny keg?
Good point on the pre sealing! Didn't consider that. Maybe thicker O rings is the solution to create an immediate seal?Top Cat wrote: ↑Mon Sep 19, 2022 8:36 pmI’m looking at a couple of cornie PRV spares as I write, and apart from the stronger spring they look very similar.floydmeddler wrote: ↑Mon Sep 19, 2022 6:56 pmStumbled upon this:
https://brew2bottle.co.uk/products/keg- ... -blue-prv
Question is... would it fit a corny keg? Looks like it might. I like to ferment in the keg sometimes and a 10psi pressure relive valve would come in very handy.
What's your thoughts?
My cornies tend to need 10 psi to create a seal with the lid, that’s with the more supple seals.
You may have to give the keg a burst of C02 to seal first, and I wonder how accurate it will be, but that probably won’t matter much.
Do you think it’s worth asking Brew2Bottle if it fits a cornie?
- floydmeddler
- Telling everyone Your My Best Mate
- Posts: 4160
- Joined: Mon Feb 16, 2009 10:37 pm
- Location: Irish man living in Brighton