Search found 88 matches

by wezzel01
Fri Sep 28, 2018 5:52 pm
Forum: Dispensing
Topic: Low CO2 pressure on new cylinder
Replies: 2
Views: 994

Re: Low CO2 pressure on new cylinder

Don’t take too much notice of the right hand gauge. I’ve got the same model of regulator and my needle barely moves off the stop, even with a brand new cylinder.


Sent from my iPad using Tapatalk
by wezzel01
Sun Sep 16, 2018 10:53 pm
Forum: Brewing Liquor
Topic: Old Peculiar - Water profile
Replies: 9
Views: 2546

Re: Old Peculiar - Water profile

Lanky94 wrote:Eric.
Many thanks for your time in providing such an interesting read. Your history and knowledge of the geology of the local area is commendable. I will try your suggested profile.
Yes, great post as always Eric.
You’re a mine if information.


Sent from my iPad using Tapatalk
by wezzel01
Tue Sep 11, 2018 8:06 pm
Forum: Cleaning, Sanitation and Sterilisation
Topic: Kindest sterilisers on septic tank system
Replies: 11
Views: 2492

Re: Kindest sterilisers on septic tank system

I understand a cesspit to be a large tank that simply gets filled and emptied. A septic tank is normally a 2 chamber tank, often made of brick and concrete, that uses bacterial digestion to break the waste down before outfalling to a soakaway. Septic tanks only need to be emptied when too many solid...
by wezzel01
Sun Aug 26, 2018 11:15 pm
Forum: Brew in a Bag
Topic: Getting the most out of my grain
Replies: 4
Views: 2726

Re: Getting the most out of my grain

Isn’t that how Fullers make London Pride and ESB?


Sent from my iPad using Tapatalk
by wezzel01
Wed Jul 18, 2018 11:48 am
Forum: Brewing Equipment
Topic: Beer Fridge
Replies: 14
Views: 1957

Re: Beer Fridge

If you're nervous about drilling holes try running the temp probe under the rubber door seal. Closing the door with the very thin lead trapped between the jamb and the seal leaves little, if any, "leak". Done this for years, not noticeable. Thanks, that is what I have done. The power cable for the ...
by wezzel01
Sat Jul 14, 2018 10:30 am
Forum: Brewing Equipment
Topic: Beer Fridge
Replies: 14
Views: 1957

Re: Beer Fridge

Well in the end I took everything out to the fridge, and it still refused to get cold. The compressor was running so it was probably loss of coolant. Yesterday I picked up a new larder fridge and this time bought a larger one with much more room. All now installed and working fine so well happy [emo...
by wezzel01
Tue Jul 10, 2018 2:12 pm
Forum: Customise Your Beer Kits
Topic: " Ditch's Stout " Master Class .....
Replies: 1812
Views: 223251

Re: " Ditch's Stout " Master Class .....

I’m really tempted to brew Ditch’s Stout. Is it really that good? Sent from my iPad using Tapatalk wezzel, Yes, it really is that good! =D> Read through the post. Great Fun. WA So is the thinking that I may have too much sugar in there and "The reason being that tea has a lot of tannins that would ...
by wezzel01
Sun Jul 08, 2018 10:41 am
Forum: Customise Your Beer Kits
Topic: " Ditch's Stout " Master Class .....
Replies: 1812
Views: 223251

Re: " Ditch's Stout " Master Class .....

Since I bought my Braumeister and dived into AG I’ve never contemplated going back to kit brews but I’m really tempted to brew Ditch’s Stout.

Is it really that good?


Sent from my iPad using Tapatalk
by wezzel01
Mon Jun 18, 2018 6:56 pm
Forum: Brewdays
Topic: AG#31 - Honey Ale
Replies: 8
Views: 1969

Re: AG#31 - Honey Ale

I made a at batch of Barney’s Honey Mild once. Turned out very nice. 450g of honey was dissolved in a little boiling water and added on day 5 of fermentation. It wasn’t boiled or simmered or sterilised in any way and turned out fine.


Sent from my iPad using Tapatalk
by wezzel01
Tue Jun 12, 2018 8:48 pm
Forum: Brewing Equipment
Topic: Beer Fridge
Replies: 14
Views: 1957

Re: Beer Fridge

Thanks Fil, I’ll get hold of a computer fan and see what happens.



Sent from my iPad using Tapatalk
by wezzel01
Mon Jun 11, 2018 8:34 pm
Forum: Brewing Equipment
Topic: Beer Fridge
Replies: 14
Views: 1957

Re: Beer Fridge

Thanks for the response. The fridge is cooling as there is ice accumulating at the top rear wall. It just isn’t getting very cold. I think I will take everything thing out and run it empty as a check. I’ll also check the door seal, that the drain isn’t blocked and maybe lag the inside where the taps...
by wezzel01
Mon Jun 11, 2018 5:38 pm
Forum: Brewing Equipment
Topic: Beer Fridge
Replies: 14
Views: 1957

Beer Fridge

The co2 bottle is just a small one and sits on the raised bit at the back (above the compressor). The bottle is kept turned on and the reg set to 10 psi for both kegs. I’ve 2 taps mounted on the door so I rarely need to open the door. I suspect that my fridge is too small for 2 cornies because, alth...
by wezzel01
Sun Jun 10, 2018 8:56 pm
Forum: Brewing Equipment
Topic: Beer Fridge
Replies: 14
Views: 1957

Re: Beer Fridge

Thanks I might be brave and have a go at drilling the side. I’ll poke a hole carefully first from inside to check for pipes.

I’m already using the drain hole as a route for the tube heater.


Sent from my iPad using Tapatalk
by wezzel01
Sat Jun 09, 2018 8:23 pm
Forum: Brewing Equipment
Topic: Beer Fridge
Replies: 14
Views: 1957

Re: Beer Fridge

Thanks, that’s definitely an option. I’ve resisted moving the gas bottle so far as I’m not keen on drilling the fridge for the co2 line in case I go through a coolant pipe.


Sent from my iPad using Tapatalk
by wezzel01
Sat Jun 09, 2018 6:09 pm
Forum: Brewing Equipment
Topic: Beer Fridge
Replies: 14
Views: 1957

Beer Fridge

I’ve recently added a second cornie to my beer fridge. It’s a single height (under counter size) larder fridge which now contains 2 standard cornies and one small 1.5Kg co2 bottle. Since adding the second keg, however, the fridge struggles to get below 11 degrees and the compressor seems to be runni...