Jim's Beer Kit

Welcome back to brewing!

I find the malt miller (http://www.themaltmiller.co.uk) really good for ingredients and equipment

https://www.brewbuilder.co.uk has some very nice equipment, I bought a nice looking mash tun from them last
year, which I need to get round to using, when it warms up a bit

Interesting thanks, do you recall if there was any PTFE on that thread too?

PeeBee - that's very interesting re. your primary dial also returning to zero after a while

Cheers Jocky, will watch that video.

Did you end up replacing the secondary reg, or fixing it somehow?

Those thick seals look good, will have to get some of them

Hi, I've got a 3 output co2 regulator, with 3 screw turnable knobs, the 'primary' dial shows normally around a bit less than 50 bar. However I'm thinking there must be a leak now. As I turn off the gas tank, leave over night. Then the primary dial reads 0 bar, but the psi readings for the 3 outputs ...

Ah cheers, looks a handy bit of kit

That looks very impressive :) What's the brass part out of interest? Just to clarify, that wand can be used for dispense from the keg? (I wasn't sure how it seals onto the keg) Edit: I'm wondering if your wand is intended for filling the keg? I've taken Cobnut up on the offer of the party star tap, ...

Ah, yeah that's a good point, hadn't though of the pressure wrt silicone (I've only used it for brewing/beer engine).

Sorry to clarify this was an idea to serve beer from breweries that sell these mini kegs, rather than using for homebrew, which I agree a proper keg would be better.

I'm curious if I could connect the following: https://stubbornmulebrewery.com/product/deluxe-co2-mini-keg-dispenser-2/ To beer/gas line, to serve from a normal tap. I'm thinking I could possibly put silicone pipe over the metal pipe and use a hose clamp and use a JG--> hose barb connector I think th...

Ended up using a bottle brush and cleaning as well as I could as well as soaking in a cleaning solution.

Just connected up a keg of Jaipur

Just wondering if anyone's used a keykeg coupler, I've removed the central 'spear' from the coupler but can't seem to figure out how to remove the ball. In the bottom theres a bit of plastic with a small hole holding it in, and I don't think it seems to want to come out the top of the 'spear' using ...

Yeah I use 70/30 (nitrogen/co2 respectively). So you didn't carb the stout at all? And just served with nitrogen? Curious what that looked like.

Just wondering re. the stout, are you planning on using a stout faucet and carbonating the stout first and dispensing with nitrogen?

(For my stout I use mixed gas and a stout faucet. A while ago I looked at a gas blender to supply n2 + co2 to a stout keg, but that seemed very expensive alas)

Norm is on ebay - https://www.ebay.co.uk/sch/normannumpa/m.html I bought a 3 way co2 regulator from him a while ago (so each output has its own pressure dial/knob to set the pressure), I screwed it onto a board and screwed that onto my shed. I screwed a mixed gas regulator onto the same board too. B...

Anyone bought one from that site? I can't really find any reviews for the site? And it was created in Jul 2020?