First AG - Fell asleep oops

Get advice on making beer from raw ingredients (malt, hops, water and yeast)
Post Reply
myke2008

First AG - Fell asleep oops

Post by myke2008 » Wed Nov 12, 2008 2:37 pm

Brewed my first AG yesterday. Tried the recipe off Jims AG page.

Everything was going well, drinking a few beers and wines while brewing. At around 01:30am this morning while the wort was cooling I fell asleep on my chair and woke up around 7:30 this morning. I continued with my AG and transfered to FV and pitched yeast. Do you think my brew will be ok as it sat around 6 hours after the boil before i pitched? Also my OG before pitching was 1.026 which seems a little low as I was about 4 litres short of 23 litres so I topped it up with water.

delboy

Re: First AG - Fell asleep oops

Post by delboy » Wed Nov 12, 2008 2:46 pm

mykeparker wrote:Brewed my first AG yesterday. Tried the recipe off Jims AG page.

Everything was going well, drinking a few beers and wines while brewing. At around 01:30am this morning while the wort was cooling I fell asleep on my chair and woke up around 7:30 this morning. I continued with my AG and transfered to FV and pitched yeast. Do you think my brew will be ok as it sat around 6 hours after the boil before i pitched? Also my OG before pitching was 1.026 which seems a little low as I was about 4 litres short of 23 litres so I topped it up with water.
The 6 hours sitting about when chilling shouldn't make any difference, but your OG is alarmingly low, are you sure about that reading, if you are something has probably gone wrong during the mash. You could think about adding some spraymalt/extract to it to get the gravity up a bit.

Kristoff

Re: First AG - Fell asleep oops

Post by Kristoff » Wed Nov 12, 2008 2:48 pm

mykeparker wrote:Also my OG before pitching was 1.026 which seems a little low as I was about 4 litres short of 23 litres so I topped it up with water.
Had you temperature corrected your hydrometer reading?

MartialAnt

Re: First AG - Fell asleep oops

Post by MartialAnt » Wed Nov 12, 2008 2:54 pm

If your hydrometer temp was correct I think thats going to be around 2.5% at the absolute most.
Look at it like this. You have 2 choices. Have a batch of shandy or drop in a bag of glucose. I dont know how much stronger 1kg would make it.

But its not advisable to add sugar after pitching. So i was old in my early brew days.

I'd risk it.

Northern Brewer

Re: First AG - Fell asleep oops

Post by Northern Brewer » Wed Nov 12, 2008 3:21 pm

The overnight cooling won't affect it. If you wanted to raise the gravity then 61g of sugar you added would raise it by one degree. Not too sure how far I'd push it though.

myke2008

Re: First AG - Fell asleep oops

Post by myke2008 » Wed Nov 12, 2008 3:25 pm

I have just added 200g of spray malt its all i have in. Hope its still drinkable. I can live with the low alcohol content.

User avatar
yashicamat
Under the Table
Posts: 1014
Joined: Wed Oct 15, 2008 8:04 pm
Location: Stockport

Re: First AG - Fell asleep oops

Post by yashicamat » Wed Nov 12, 2008 7:41 pm

I'd probably drop a shedload of hops into it when it goes into the barrel to add more flavour, OR brew up a stronger ale and mix the two at serving time?
Rob

POTTER BREWERY (mothballed 2020)

Fermenting: nowt (sadly). Drinking: still a few bottles of my imperial stout knocking about . . . it's rather good now

myke2008

Re: First AG - Fell asleep oops

Post by myke2008 » Wed Nov 12, 2008 10:01 pm

Good idea. I really hope its drinkable. Been looking through beersmith at my brew plan i followed and I can't seem to work out why its came in massively under. Other than coming in under 3 litres when it went into the FV. Do you lot reckon it could be down to the sparging?

Parva

Re: First AG - Fell asleep oops

Post by Parva » Wed Nov 12, 2008 10:21 pm

What was your grain bill?

booldawg

Re: First AG - Fell asleep oops

Post by booldawg » Wed Nov 12, 2008 10:44 pm

What was the brewhouse efficiency figure set to?

myke2008

Re: First AG - Fell asleep oops

Post by myke2008 » Thu Nov 13, 2008 12:48 am

Parva wrote:What was your grain bill?
3.75Kg (Its the recipe thats on jims all grain page)
booldawg wrote:What was the brewhouse efficiency figure set to?
It was set a 75%

Parva

Re: First AG - Fell asleep oops

Post by Parva » Thu Nov 13, 2008 2:18 am

I'm about to do AG #8 and it will follow my set pattern of using 5Kg grain to aim for around a 5% brew. I would drop your efficiency calculations to 60% and up your grain bill for your next one. I'm slowly getting my efficiency up and can probably start dropping my grain bill a little but I do know that 5Kg's will always give me a good pint no matter what I do to try and destroy it. :) Better to waste some grain and get a good beer than waste some time and get a mediocre one.

myke2008

Re: First AG - Fell asleep oops

Post by myke2008 » Thu Nov 13, 2008 10:12 am

Parva wrote:I'm about to do AG #8 and it will follow my set pattern of using 5Kg grain to aim for around a 5% brew. I would drop your efficiency calculations to 60% and up your grain bill for your next one. I'm slowly getting my efficiency up and can probably start dropping my grain bill a little but I do know that 5Kg's will always give me a good pint no matter what I do to try and destroy it. :) Better to waste some grain and get a good beer than waste some time and get a mediocre one.
Thanks ill try around 60% and i agree the grain is relatively cheap in the whole cost of things

Post Reply