Dry Brew

Get advice on making beer from raw ingredients (malt, hops, water and yeast)
Post Reply
Andypandy

Dry Brew

Post by Andypandy » Mon Nov 10, 2008 10:43 pm

Hi, after sometime brewing 3Kg Kits I decided to have a go at an AG brew using Daab's mini mash recipes/techiniques. Although the results so far have been quite palatable, nice hop and malt aromas, the brews have been a little "dry" tasting for my liking. I am mashing pale malt and crystal together for 90 min @ 65'C. Should I add the crystal to the boil instead if I want a slightly sweeter finish? I am using Munton's Gold yeast. Any suggestions?

Scooby

Re: Dry Brew

Post by Scooby » Mon Nov 10, 2008 11:09 pm

I'd try mashing slightly hotter at say 67C, that should produce a greater
proportion of unfermentable sugars and a less dry beer :wink:

User avatar
yashicamat
Under the Table
Posts: 1014
Joined: Wed Oct 15, 2008 8:04 pm
Location: Stockport

Re: Dry Brew

Post by yashicamat » Mon Nov 10, 2008 11:38 pm

Scooby wrote:I'd try mashing slightly hotter at say 67C, that should produce a greater
proportion of unfermentable sugars and a less dry beer :wink:
Seconded - I've done the reverse, dropping from about 68C mash temps to about 64/65 to get a drier beer. :)
Rob

POTTER BREWERY (mothballed 2020)

Fermenting: nowt (sadly). Drinking: still a few bottles of my imperial stout knocking about . . . it's rather good now

Andypandy

Re: Dry Brew

Post by Andypandy » Mon Nov 10, 2008 11:42 pm

Cheers, i'll give it a whirl!

prolix

Re: Dry Brew

Post by prolix » Mon Nov 10, 2008 11:59 pm

just to check is it dry or astringent (tastes like a tea bag) because sparging at too high a temp can cause that

Andypandy

Re: Dry Brew

Post by Andypandy » Tue Nov 11, 2008 8:19 pm

I would say dry as in dry sherry

prodigal2

Re: Dry Brew

Post by prodigal2 » Tue Nov 11, 2008 8:37 pm

As Scooby suggests, mash at a higher temperature. 67C and see what difference that makes.
Also do you check the temp of your mash at the end? It could be that you are loosing quite a bit of heat during the mash.

oblivious

Re: Dry Brew

Post by oblivious » Wed Nov 12, 2008 11:03 am

Also you could try using yeast like WPO002 or WLP005

Andypandy

Re: Dry Brew

Post by Andypandy » Wed Nov 12, 2008 11:28 pm

I did wonder about the yeast, whether or not it was too "aggressive". Would using a whole pack meant for 5 gallons in a 1 gallon brew make any difference? Fermenting only took a couple of days. I've always used Munton's Gold especially when modifying kits with crystal etc. I never have the dreaded Woodforde's stuck brew syndrome!

Like I say the all grain brew is very drinkable but I prefer that slightly sweeter malty finish.

scarer

Re: Dry Brew

Post by scarer » Thu Nov 13, 2008 2:41 pm

What sort of OG and FG are you getting?

Andypandy

Re: Dry Brew

Post by Andypandy » Fri Nov 14, 2008 11:17 pm

1040 - 1010

User avatar
yashicamat
Under the Table
Posts: 1014
Joined: Wed Oct 15, 2008 8:04 pm
Location: Stockport

Re: Dry Brew

Post by yashicamat » Sat Nov 15, 2008 12:18 am

I've used Muntons Gold once and it produced a pretty dry brew too. Cleared very well mind you with a rock solid sediment! I'd suggest trying a more typical English ale strain, I'm drinking a simple AG (just MO with Amarillo and a few other bits and bobs) and it's got a nice malty finish. This was made with Wyeast Brit Ale 2.
Rob

POTTER BREWERY (mothballed 2020)

Fermenting: nowt (sadly). Drinking: still a few bottles of my imperial stout knocking about . . . it's rather good now

Post Reply