Sometimes you can make the most elementary mistakes.
Filled the boiler with 5 gallons of water and brought it to the boil, In the meantime mixed the 500g of extra light DME with 4L of cold water, and added it tot he boiler. . . . . . . Ah now have 6 Gallons in the boiler
How did that happen 
, oh well see what sort of gravity I have when I've added the extract . . . . open tin, pour it into stainless bucket and add hot water from boiler stir to dissolve, rinse tin, add back to boiler. Stir well to mix . . . and measure the gravity . .. 7.?? brix should be higher than that . . . . Oh well looks as though the kilo of Beer enhancer will come in handy . . . . Added that to the wort . . .lump soup 
RDWHAHB . . . . Wort came to a boil and I got the lumps dissolved . . . . Added 35g of old Saaz hop pellets, and the immersion chiller, after 15 minutes turn off the boiler and started chilling. When the wort got to 70C, turn off the chiller and added the remainder of the packet of hops . . . . just over 40g Oh well, let them steep for 15 minutes and started chilling again, took a gravity reading (11+ brix ~1.044 better). Chilled to 20C, removed IC put lid on and left it for an hour to settle. Syphoned 17L into the corny FV, and 3L into a conical for starters . . . poured rest down the drain 
.Corny FV was put into a bucket of water with a 100w Aquarium heater in it, and the new RabMaxwell FV Chiller into the wort. FV temp controller turned on, and when wort was at 12C yeast was pitched . . . . Total time for brew 5 hours . . . I'm going back to AG, this kit brewing takes up too much time.
Still had a look at the beer when I got home, nice 2-3 inches of foam on top which is a surprise, as the yeast is a definite bottom worker. . . . Still its only 48 hours since pitching . . . . it'll die back after a few days.
(Oh AG CAP planned for 14 days time once this stater has finished
)
