First of many.

Had a good one? Tell us about it here - and don't forget - we like pictures!
Post Reply
User avatar
EportJake
Piss Artist
Posts: 138
Joined: Sat Jul 19, 2008 8:27 pm
Location: Ellesmere Port, Wirral

First of many.

Post by EportJake » Tue Aug 05, 2008 10:30 pm

Ok, today was my first brewday. It was all in all semi-successful; I somehow ended up with too much beer and consequently its likely to be a little weak (around 3%). Despite that it was a massive learning experience and I am confident my next brew will be much better. Anyway:

Image
Mashing. 90 mins. Start 67 deg. Finish 63 deg.
Image
Uh oh. Mash tun full. Collected 14L. Did a small 3rd mash to take it up to 31L collected.
Image
Boilage.
Image
Cooling. Counter flow cooler worked a treat.
Image
Controlled to 22 deg. Hop strainer blocked early on, but freed it up with a stir and it was fine afterward.

Somehow I collected about 29L in my FV (target 23L) so its gravity was only 1.034. In hindsight I didnt need the 3rd mini-mash. Hopefully it will be drinkable. All in all I'm reasonably happy. Any suggestions to increase its alcohol content would be appreciated. Next brew: Brakspear special.
Top
Seveneer

Post by Seveneer » Tue Aug 05, 2008 10:35 pm

I'd ferment it as it is and accept that you've done a pretty good job of making beer for your first go.

Low gravity beer is better than no beer :wink:

/Phil.
Top
Totem

Post by Totem » Tue Aug 05, 2008 10:49 pm

So looks like pre boil your wanting to collect about 26lt?
Top
User avatar
EportJake
Piss Artist
Posts: 138
Joined: Sat Jul 19, 2008 8:27 pm
Location: Ellesmere Port, Wirral

Post by EportJake » Tue Aug 05, 2008 11:05 pm

Totem wrote:So looks like pre boil your wanting to collect about 26lt?
Yeah that's probably more like it. I used DaaB's calculation for a 23L fermentation which suggested collecting 30.5L pre-boil. I think this amount was right, but the recipe I used had a low hop content (and so absorbed much less) and the humid weather made evaporation much less. Whether these things acounted for the excessive liquid in my FV i'm not sure. Next time I will again scale the recipe down to 23L, but do just 2 batch sparges and so collect 28L pre boil.
Top
Vossy1

Post by Vossy1 » Wed Aug 06, 2008 8:21 am

Glad to see you had a great 1st brewday EJ 8)
even managing a few pics...good man :lol:
Top
Buzz

Post by Buzz » Wed Aug 06, 2008 1:38 pm

Turned out better than my first attempt so I wouldn't be too hard on yourself. Should be a nice session beer at that sort of gravity. :D
Top
User avatar
EportJake
Piss Artist
Posts: 138
Joined: Sat Jul 19, 2008 8:27 pm
Location: Ellesmere Port, Wirral

Post by EportJake » Sat Aug 09, 2008 7:42 pm

Right chaps, tested the gravity and more importantly tasted it and its goooooood! Well chuffed. My original gravity was 1.034 and now it is 1.008. Do i need to keg this now or can I wait? I think its still fermenting and its rather cloudy. Looking at King Kegging it,
Jake.
Top
User avatar
Horden Hillbilly
Moderator
Posts: 2150
Joined: Mon May 08, 2006 1:00 pm
Location: Horden, Co. Durham
Contact:
Contact Horden Hillbilly

Post by Horden Hillbilly » Sat Aug 09, 2008 8:45 pm

I would wait until you have 2 consistent hydrometer readings 24 hours apart before you keg your brew. It probably won't drop much further though, if at all.

I'm sure that you will still enjoy beer despite your problems, at least you know what went wrong & how to correct it on your next brew, well done! 8)
Top
Post Reply

Return to “Brewdays”