AG#31 - Stout

Had a good one? Tell us about it here - and don't forget - we like pictures!
Post Reply
WishboneBrewery
CBA Prizewinner 2010
Posts: 7874
Joined: Sun Nov 30, 2008 9:06 pm
Location: Keighley, West Yorkshire
Contact:

AG#31 - Stout

Post by WishboneBrewery » Sat Jul 10, 2010 6:30 pm

Just logging this here...
Did a bit of a Brew Trial for work today, the brew went well...
It was a 4.1% Stout with Pale, Crystal, Torrefied, Roasted, Black. Bittered with Fuggle, Last 15mins with Golding, Flame-out steep with Fuggle. Water treatment added to mash to the GW Calc Stout profile minus the common salt.
I ended up with a FV that was too full and my Mash efficiency was through the roof, checked with both Refractometer & Hydrometer my Pre-Boil wort was (11Brix) 1.042 (Wort in the Copper 31 Litres) and I was only aiming for 1.045 Starting Gravity, BeerEngine says my efficiency was 94%...
End of Boil I had to liquor-back.
Image
Yeast was Nottingham.
Bottled up two previous brews so quite a busy day.

Spud395

Re: AG#31 - Stout

Post by Spud395 » Sat Jul 10, 2010 6:41 pm

Sounds nearly like a days work ;)
How high did the OG go after the boil?

WishboneBrewery
CBA Prizewinner 2010
Posts: 7874
Joined: Sun Nov 30, 2008 9:06 pm
Location: Keighley, West Yorkshire
Contact:

Re: AG#31 - Stout

Post by WishboneBrewery » Sat Jul 10, 2010 6:56 pm

about 1047 which is near enough for me most days :)

Post Reply