Page 1 of 1
Brewday With My Home Built Single Vessel System
Posted: Mon Dec 27, 2021 5:05 am
by billygoat
Brewing today an American Pale Ale.
Grist is:
Joe White Signature Ale Malt 85%
Simpsons Light Crystal 5%
Best Malz Malted Wheat 5%
Best Malz Munich 1 5%
Strike water heated up and ready to go.
Mashing in.
Recirculating the mash.
Mashing away while I watch Day 2 of the third Ashes Test from the MCG.
Re: Brewday With My Home Built Single Vessel System
Posted: Mon Dec 27, 2021 5:18 am
by billygoat
Sparging
60 min hop addition.
Cascade 10 g
Mosaic 10 g
Simcoe 10 g
Immersion chiller added to boiling wort to sterilise.
At the end of the boil I cooled the wort to just under 80C and added 30g of Cascade, 30g of Mosaic and 30g of Simcoe.
I then let that sit for 30 mins.
Re: Brewday With My Home Built Single Vessel System
Posted: Mon Dec 27, 2021 6:40 am
by billygoat
Yeast pitched and safely in the fermentation fridge.
There will be a dry hop added during fermentation consisting of 50g of Centennial, 50g of Mosaic and 50g of Simcoe.
Was aiming for 1.051 and it was spot on so very happy.
Re: Brewday With My Home Built Single Vessel System
Posted: Mon Dec 27, 2021 9:56 am
by Jocky
That’s a really nice and neat system. Thanks for sharing.
Re: Brewday With My Home Built Single Vessel System
Posted: Mon Dec 27, 2021 12:50 pm
by Cobnut
But please no further cricket mentions…it’s the hope that is killing me!
Re: Brewday With My Home Built Single Vessel System
Posted: Mon Dec 27, 2021 9:12 pm
by Fastline
Great post, fantastic kit
Re: Brewday With My Home Built Single Vessel System
Posted: Mon Dec 27, 2021 9:35 pm
by MashBag
Good show indeed.
Had the tasting started?