Clear wort before boil - important?
Clear wort before boil - important?
I've been watching a few videos where people use mash tuns rather than mashing in the bk. Some recycle the first few runnings (if that's the right word) of wort that aren't clear back into the mash tun and only run clear wort into the bk.
Which got me thinking about biab. The wort I have pre boil after draining the grain sack is a million miles away from clear.
What's the thinking with clear wort preboil? Is this something that we biabaggers should be conscious of. Not that I can think of a way of making it clear without letting it settle and syphoning of the top, which would take ages and might as well do a mash in a separate tun.
Just to be clear. I'm not worried about clear wort into my fermenter or my final beer being clear. My question is all about preboil clear wort straight after the mash.
Which got me thinking about biab. The wort I have pre boil after draining the grain sack is a million miles away from clear.
What's the thinking with clear wort preboil? Is this something that we biabaggers should be conscious of. Not that I can think of a way of making it clear without letting it settle and syphoning of the top, which would take ages and might as well do a mash in a separate tun.
Just to be clear. I'm not worried about clear wort into my fermenter or my final beer being clear. My question is all about preboil clear wort straight after the mash.
-
- Lost in an Alcoholic Haze
- Posts: 677
- Joined: Tue May 05, 2015 11:21 am
Re: Clear wort before boil - important?
In BIAB you have no way to use the grain bed as a filter, and have clear wort go into the boil.
BIAB Brewers with a good regime, don't seem to be impacted by this. They clarify and remove the turbidity in the Boil and get clear wort into the FV.
BIAB Brewers with a good regime, don't seem to be impacted by this. They clarify and remove the turbidity in the Boil and get clear wort into the FV.
-
- Drunk as a Skunk
- Posts: 904
- Joined: Tue Jan 15, 2013 11:42 am
- Location: Newton-le-Willows ( St Helens/Warrington)
Re: Clear wort before boil - important?
Err no mostly the wort is cloudy going into the FV but don't worry about it you should still get clear beer in the bottle, if you want all the discussion have a read around at Biabrewer.infoThey clarify and remove the turbidity in the Boil and get clear wort into the FV.
ATB. aamcle
-
- Lost in an Alcoholic Haze
- Posts: 500
- Joined: Fri Feb 24, 2012 10:28 pm
- Location: North Tawton
Re: Clear wort before boil - important?
I think the idea of recirculating the first runnings or ‘vorlaufing’ is to set the grainbed to make a filter and return any grain back into the mash tun so no grain gets into the boil kettle which apparently, can cause astringency.
My wort was never clear when I did this just free of grain. Now I have a HERMS the wort is clear going over to the BK as it’s been filtering through the grainbed for an hour or so!
My wort was never clear when I did this just free of grain. Now I have a HERMS the wort is clear going over to the BK as it’s been filtering through the grainbed for an hour or so!
Re: Clear wort before boil - important?
Sorry i started this thread and haven't been here for a while. thx for the replies.
In the never ending search for the best beer possible - i was wondering if the clearest wort during the boil impacts on flavour?
In the never ending search for the best beer possible - i was wondering if the clearest wort during the boil impacts on flavour?
-
- Telling imaginary friend stories
- Posts: 5229
- Joined: Sun Oct 16, 2011 1:49 pm
- Location: Cowley, Oxford
Re: Clear wort before boil - important?
fwiw i must have recycled the whole mash volume back with jugs with some brews with the goal of replicating some of the crystal clear preboil liquors i have seen pictured in here and other places.. never managed to get it tho.. However after investing in a g/f i was very pleased to see the same grain i failed to clear run very clear after 30-40mins of recirculation in the machine..
ist update for months n months..
Fermnting: not a lot..
Conditioning: nowt
Maturing: Challenger smash, and a kit lager
Drinking: dry one minikeg left in the store
Coming Soon Lots planned for the near future nowt for the immediate
Fermnting: not a lot..
Conditioning: nowt
Maturing: Challenger smash, and a kit lager
Drinking: dry one minikeg left in the store
Coming Soon Lots planned for the near future nowt for the immediate
-
- Lost in an Alcoholic Haze
- Posts: 677
- Joined: Tue May 05, 2015 11:21 am
Re: Clear wort before boil - important?
If you get rid of that protein in the mash tun, in the kettle, or leave it behind in the FV what does it matter ?
Re: Clear wort before boil - important?
Glad it's not just me. I often recirculate (jug) maybe 10L through the coolbox before it's really clear. (~20L brew)Fil wrote: ↑Thu Oct 05, 2017 3:24 amfwiw i must have recycled the whole mash volume back with jugs with some brews with the goal of replicating some of the crystal clear preboil liquors i have seen pictured in here and other places.. never managed to get it tho.. However after investing in a g/f i was very pleased to see the same grain i failed to clear run very clear after 30-40mins of recirculation in the machine..
Last edited by MTW on Thu Oct 05, 2017 2:01 pm, edited 1 time in total.
Busy in the Summer House Brewery
Re: Clear wort before boil - important?
I've hit the wrong button again
Busy in the Summer House Brewery
- Kev888
- So far gone I'm on the way back again!
- Posts: 7701
- Joined: Fri Mar 19, 2010 6:22 pm
- Location: Derbyshire, UK
Re: Clear wort before boil - important?
It really depends on what and how much is causing the cloudiness. Cooking/boiling the grain isn't desirable, it extracts unwanted compounds and flavours, so it is best to avoid too much physical grain matter getting into the kettle. Milky starch running into the kettle would also be bad, it should have been fully converted in the mash beforehand.
But the need for 'absolute' clarity of run-off from the grain is contentious, different brewers (and nationalities) have differing views. Personally I like to hold back unwanted stuff from each subsequent stage, whether it be mash to kettle, kettle to FV or FV to keg. Some things are harder to deal with later, or damage may already have been done. But in practice miniscule quantities getting through is not unusual and won't have much effect on flavour or stability in a homebrew context. So I only do what is reasonably practicable and then don't obsess about minor imperfections that have no detectable effect.
It isn't always under your control, in any case. All brewing systems are a set of compromises, some draw different ones than others. A separate mash tun and recirculating pump make it easy to trap cloud-making particles of significant size before the kettle, so with such a system why wouldn't you? But (for example) a fine crush in a bag mashed directly in the kettle is always going to mean more particles and bits making it to the boil, it can't be avoided. It is not really ideal, but is normal and BIAB doesn't inherently produce unacceptable homebrew as a result, which may help put the consequences into context. Just be aware of it: recirculate to reduce it if you have the means (and willingness) to do so, and don't make it intentionally worse than it has to be -e.g. with choices of crush and bag etc.
But the need for 'absolute' clarity of run-off from the grain is contentious, different brewers (and nationalities) have differing views. Personally I like to hold back unwanted stuff from each subsequent stage, whether it be mash to kettle, kettle to FV or FV to keg. Some things are harder to deal with later, or damage may already have been done. But in practice miniscule quantities getting through is not unusual and won't have much effect on flavour or stability in a homebrew context. So I only do what is reasonably practicable and then don't obsess about minor imperfections that have no detectable effect.
It isn't always under your control, in any case. All brewing systems are a set of compromises, some draw different ones than others. A separate mash tun and recirculating pump make it easy to trap cloud-making particles of significant size before the kettle, so with such a system why wouldn't you? But (for example) a fine crush in a bag mashed directly in the kettle is always going to mean more particles and bits making it to the boil, it can't be avoided. It is not really ideal, but is normal and BIAB doesn't inherently produce unacceptable homebrew as a result, which may help put the consequences into context. Just be aware of it: recirculate to reduce it if you have the means (and willingness) to do so, and don't make it intentionally worse than it has to be -e.g. with choices of crush and bag etc.
Kev
- Jocky
- Even further under the Table
- Posts: 2738
- Joined: Sat Nov 12, 2011 6:50 pm
- Location: Epsom, Surrey, UK
Re: Clear wort before boil - important?
Agree with Kev. First thing is to avoid chunks of grain ending up in the boil. I always expect a few particles of grain to come through, and the odd husk isn't going to matter. You just want to avoid running a sloppy load of grain into your kettle.
The other thing I've had issues with is flour from the mash burning onto kettle elements. In extreme cases you can end up with ashtray flavour beer. For me it seems to happen more often with high wheat beers, but has not been an issue since I started taking a little more care when vorlaufing to avoid flour and adding a decent amount of oat husks to high wheat beer to help filter.
The other thing I've had issues with is flour from the mash burning onto kettle elements. In extreme cases you can end up with ashtray flavour beer. For me it seems to happen more often with high wheat beers, but has not been an issue since I started taking a little more care when vorlaufing to avoid flour and adding a decent amount of oat husks to high wheat beer to help filter.
Ingredients: Water, Barley, Hops, Yeast, Seaweed, Blood, Sweat, The swim bladder of a sturgeon, My enemies tears, Scenes of mild peril, An otter's handbag and Riboflavin.
-
- Lost in an Alcoholic Haze
- Posts: 677
- Joined: Tue May 05, 2015 11:21 am
Re: Clear wort before boil - important?
In summary: crystal clear runnings to BK isn't inherently better for beer quality than hazy or cloudy runnings, unless the runnings contain undesirables like those mentioned above that can have flavour side effects in the BK or FV ie:
- milky starch
- husk material
- excess of flour burning on elements
The quality improvement comes from eliminating the above, not the haze per se.
But you can't tell good haze from bad haze: best to leave it behind as much as your process allows
- milky starch
- husk material
- excess of flour burning on elements
The quality improvement comes from eliminating the above, not the haze per se.
But you can't tell good haze from bad haze: best to leave it behind as much as your process allows
Re: Clear wort before boil - important?
I feel like trying to reduce the amount of cloudyness in my bk now. It looks soooo milky (maybe starch as someone mentioned).
Has anyone tried recirculating wort without a mash tun? Biab style. I was thinking about suspending the bag above a another pot and using the grain as a filter bed as per a mash tun and carefully recirculating.
This would be a full volume mash but without a mash tun. Anyone see any issues here? I would have to figure out a way of suspending the grain sack so that the opening is big enough for me to get a jug in.
The effort I go to with water treatment and pre boiling and ph testing - i reckon an extra 1/2 hr is worth a go.
After writing this I found this viewtopic.php?p=819585#p819585
Which is an interesting read and looks like i need a pulley system
Has anyone tried recirculating wort without a mash tun? Biab style. I was thinking about suspending the bag above a another pot and using the grain as a filter bed as per a mash tun and carefully recirculating.
This would be a full volume mash but without a mash tun. Anyone see any issues here? I would have to figure out a way of suspending the grain sack so that the opening is big enough for me to get a jug in.
The effort I go to with water treatment and pre boiling and ph testing - i reckon an extra 1/2 hr is worth a go.
After writing this I found this viewtopic.php?p=819585#p819585
Which is an interesting read and looks like i need a pulley system
-
- Telling imaginary friend stories
- Posts: 5229
- Joined: Sun Oct 16, 2011 1:49 pm
- Location: Cowley, Oxford
Re: Clear wort before boil - important?
recirculating biab is pretty much what the grain-father, bulldog etc.... machines do with great success so yes.. however generally some sort of heat input is required if the re-circulation is carried out during the mash period herms or rims, the above machines being labeled 'kettle rims'.
However if you apply the re-circulation post mash when temp maintenance is less crucial you may not need any heat input tho you may want to up the sparge temp a tad to compensate for temp loss during the recirculation.
from my own limited experience with my grain-father the liquor is generally running clear after 15 minutes of re-circulation during the mash, SO? if you can achieve similar results within a similar time period i would suggest its a goer
However if you apply the re-circulation post mash when temp maintenance is less crucial you may not need any heat input tho you may want to up the sparge temp a tad to compensate for temp loss during the recirculation.
from my own limited experience with my grain-father the liquor is generally running clear after 15 minutes of re-circulation during the mash, SO? if you can achieve similar results within a similar time period i would suggest its a goer
ist update for months n months..
Fermnting: not a lot..
Conditioning: nowt
Maturing: Challenger smash, and a kit lager
Drinking: dry one minikeg left in the store
Coming Soon Lots planned for the near future nowt for the immediate
Fermnting: not a lot..
Conditioning: nowt
Maturing: Challenger smash, and a kit lager
Drinking: dry one minikeg left in the store
Coming Soon Lots planned for the near future nowt for the immediate
-
- Lost in an Alcoholic Haze
- Posts: 677
- Joined: Tue May 05, 2015 11:21 am
Re: Clear wort before boil - important?
I don't think a suspended bag is going to work very well as a filter.
Alternatively you could just use a proper filter. With a pump setup you could recirculate through a finer weave voile bag, or use an inline filter cartridge
Alternatively you could just use a proper filter. With a pump setup you could recirculate through a finer weave voile bag, or use an inline filter cartridge