Polykegs & Sankey Stype Coupler question

[ArmChair]

can anyone advise me how to use a Sankey S-type Coupler to gas a keg. Ive just had a beer shower, twice!

[Aleman]

Lever in the up position, twist the coupler onto the keg, then press the lever down to engage

Twist first then press . . .it should be a mantra wne putting the couplers on . . .of course when taking them off it is the reverse

[GrowlingDogBeer]

Make sure you have a stopper in the beer out connector, or have a tap connected, switched off.

[Aleman]

Make sure you have a stopper in the beer out connector, or have a tap connected, switched off.

My initial thought to that Steve was . . ."Well Duh!!" . . .but then I have remembered the occasions I have given myself a shower attaching a corny disconnect . . .Yeah you can't really get that one wrong can you?

[GrowlingDogBeer]

Make sure you have a stopper in the beer out connector, or have a tap connected, switched off.

My initial thought to that Steve was . . ."Well Duh!!" . . .but then I have remembered the occasions I have given myself a shower attaching a corny disconnect . . .Yeah you can't really get that one wrong can you?

I've done similar. I have filled a corny, then connected it to the gas supply to force carb only to discover I have forgotten to put the poppet back in the beer out post. Oops

[ArmChair]

Make sure you have a stopper in the beer out connector, or have a tap connected, switched off.

Cheers Guys,

This is where I have been going wrong

[GrowlingDogBeer]

Make sure you have a stopper in the beer out connector, or have a tap connected, switched off.

Cheers Guys,

This is where I have been going wrong

We live and learn

[Aleman]

Make sure you have a stopper in the beer out connector, or have a tap connected, switched off.

Cheers Guys,

This is where I have been going wrong

[ArmChair]

What size John Guest goes on the top?
I got a 10mm and it was a tad to small