New to kegerators and cornies - a little advice required

[orlando]

The QC on the Chinese copies means it will be a bit of pot luck whether they drip or not.

and where are Perlicks made? I have got all Chinese and have never had a problem. The only thing I don't like is the fact they do not have a removable plastic spout. In my opinion the best taps are ZERFASS SK 196-002. Not only do they have a flow control and a removable plastic spout they have a push action foaming to put a head on the beer if you like it served that way. The only drawback is they are not available with long shanks which you need for a keezer. You can find them here
http://www.candirect.de/Kompensatorscha ... 35-mm-lang

I use these. As IPA syas the long shank versions are easier to use but are more expensive, if you use a spade bit on the inside of the keezer collar you can still use the short shank ones. Mine don't have the plastic spout, well one does, but by regularly using beer line cleaner it doesn't seem to matter much. Mine do dribble a little after dispense but I just hold the glass underneath till it stops and there are no more drips. Postage is a killer and takes a month but they are still cheaper than anywhere else I have found to date. IPA is right about the quality, can't fault them.