Gamebeer Kegerator

[deanrpwaacs01]

That looks very smart . Im getting more tempted to go the cornie route . I use 5ltr mini kegs at the mo . Bottling is a real pain but needed for the 9% saisons and impys that need a bit of age [SMILING FACE WITH SMILING EYES] .

[f00b4r]

Would no nails do the trick to stick some wood on yo side. Then screw into that?

Not sure but there was nothing in the sides just the back so there was no problems.

Emptied the fire extinguisher by accident while playing around with the pressures so I upgraded to the real deal today.

2015-05-29 16.59.37.jpg

It looks nice, are you able to still fit 3 cornies in?
Also how did you attach the drip tray, with the taps you have added (no more nails?) wood to the inside to support it but I cannot see if you did anything to support the screws from the drip tray?

[Buckie Brewer]

The third keg is a 12ltr short model which sits under the regulator. The drip tray as with the wood are attached by short but squat stainless self tapping screws. I don't intend the drip tray too see much weight.

[f00b4r]

Ah that makes sense. I have already bought secondary regulators but avoided the ones you have because of no gauge, out of interest how do you set the pressure or is it just trial and error to find the right serving pressure?

[Buckie Brewer]

At the moment all three are the same pressure so I just open the secondary valves fully and then set it on the primary. Once I start setting for different pressures I have a gauge with a drain off valve to set them.