OK. After some research i hope i have found a good starting kit. Hopefully the experienced users can confirm this is a decent deal.
http://www.ebay.co.uk/itm/231830406837
Sent from my XT1068 using Tapatalk
Hambleton Bard s30 dispenser
Re: Hambleton Bard s30 dispenser
It is between the above or this below with a regulator added.
Both seem similar items. Any thoughts on which to go for?
Thanks
http://www.ebay.co.uk/itm/231830406837
Sent from my XT1068 using Tapatalk
Both seem similar items. Any thoughts on which to go for?
Thanks
http://www.ebay.co.uk/itm/231830406837
Sent from my XT1068 using Tapatalk
Re: Hambleton Bard s30 dispenser
Sorry I've duplicated the same link.
This is my other option with a regulator added.
http://www.ebay.co.uk/itm/222221468909
Sent from my XT1068 using Tapatalk
This is my other option with a regulator added.
http://www.ebay.co.uk/itm/222221468909
Sent from my XT1068 using Tapatalk
-
- Telling imaginary friend stories
- Posts: 5229
- Joined: Sun Oct 16, 2011 1:49 pm
- Location: Cowley, Oxford
Re: Hambleton Bard s30 dispenser
email Norm of corny keg supplying fame, Norman Felton <normansplace@hotmail.com> ebay id Normutopia or similar iirc
if you want everything from one place, lots of brewers have bought from him and he is honest, and will sell kegs uncleaned to kegs tidied up with new seals and even kegs repolished prices according to the work gone in, and he can supply regs line disconnects and even gas management boards for multi level gas pressure settting for different kegs.. .
Tthe reg included in link #1 looks like a £25-£30 welders co2 regulator, which is all you need with corny kegs as each keg has its own prv fitted.
neither link has any antifobbing other than flow control taps, my limited experience with similar is that they are great for lower serving presures but ' 8psi and over become a pita never quite finding the sweet spot so i would add upto a couple of meters of 3/16" beerline and the requiered 3/8" to 3/16" JG reducers too
beer/gas line is cheap at about 50p a meter.
if you want everything from one place, lots of brewers have bought from him and he is honest, and will sell kegs uncleaned to kegs tidied up with new seals and even kegs repolished prices according to the work gone in, and he can supply regs line disconnects and even gas management boards for multi level gas pressure settting for different kegs.. .
Tthe reg included in link #1 looks like a £25-£30 welders co2 regulator, which is all you need with corny kegs as each keg has its own prv fitted.
neither link has any antifobbing other than flow control taps, my limited experience with similar is that they are great for lower serving presures but ' 8psi and over become a pita never quite finding the sweet spot so i would add upto a couple of meters of 3/16" beerline and the requiered 3/8" to 3/16" JG reducers too

beer/gas line is cheap at about 50p a meter.
ist update for months n months..
Fermnting: not a lot..
Conditioning: nowt
Maturing: Challenger smash, and a kit lager
Drinking: dry one minikeg left in the store
Coming Soon Lots planned for the near future nowt for the immediate
Fermnting: not a lot..
Conditioning: nowt
Maturing: Challenger smash, and a kit lager
Drinking: dry one minikeg left in the store
Coming Soon Lots planned for the near future nowt for the immediate

Re: Hambleton Bard s30 dispenser
Great. Thanks for the reply. Norm it is. I'll also go for the suggested beer lines.
Sent from my XT1068 using Tapatalk
Sent from my XT1068 using Tapatalk
Re: Hambleton Bard s30 dispenser
I just got 2 kegs from Norm off Ebay for £80 delivered.
They have new seals, polished and arrived pressurised. A few dents but nothing major.
I can happily recommend him.
They have new seals, polished and arrived pressurised. A few dents but nothing major.
I can happily recommend him.
- Kev888
- So far gone I'm on the way back again!
- Posts: 7701
- Joined: Fri Mar 19, 2010 6:22 pm
- Location: Derbyshire, UK
Re: Hambleton Bard s30 dispenser
Thats normannumpa, Fil, though at times a utopia it may seemFil wrote:email Norm of corny keg supplying fame, Norman Felton <normansplace@hotmail.com> ebay id Normutopia or similar

He has some things listed at the moment on ebay here, but often has other stuff too. He includes his phone number in some of the listings.
Kev
- orlando
- So far gone I'm on the way back again!
- Posts: 7201
- Joined: Thu Nov 17, 2011 3:22 pm
- Location: North Norfolk: Nearest breweries All Day Brewery, Salle. Panther, Reepham. Yetman's, Holt
Re: Hambleton Bard s30 dispenser
I would snap up that gas management board, if I didn't already have one.Kev888 wrote:Thats normannumpa, Fil, though at times a utopia it may seemFil wrote:email Norm of corny keg supplying fame, Norman Felton <normansplace@hotmail.com> ebay id Normutopia or similar![]()
He has some things listed at the moment on ebay here, but often has other stuff too. He includes his phone number in some of the listings.
I am "The Little Red Brooster"
Fermenting:
Conditioning:
Drinking: Southwold Again,
Up Next: John Barleycorn (Barley Wine)
Planning: Winter drinking Beer
Fermenting:
Conditioning:
Drinking: Southwold Again,
Up Next: John Barleycorn (Barley Wine)
Planning: Winter drinking Beer