10L cheap pressure keg recommendation

[clarets7]

Right. I needed to make a move on this so bought this:
https://www.amazon.co.uk/gp/product/B09 ... UTF8&psc=1

Ha, that's exactly the same one that I bought 6 years ago and is still on the shelf Keep us informed on progress and I'll sort mine out

[MashBag]

The aussie post certainly works. Good shout.

[floydmeddler]

Right. I needed to make a move on this so bought this:
https://www.amazon.co.uk/gp/product/B09 ... UTF8&psc=1

Ha, that's exactly the same one that I bought 6 years ago and is still on the shelf Keep us informed on progress and I'll sort mine out

Will do. Will be in Nov probably as Corny fittings are coming from China.

[PeeBee]

... Are these reusable, though?

Not-reuseable = one-shot. Or, at least that's how I was referring to it.

These are some being discussed on another forum, but I've no idea who supplies them.

73673-003.jpg (50.02 KiB) Viewed 8298 times

[zipfly]

think they are keg king junior kegs

Sent from my VOG-L09 using Tapatalk

[MashBag]

They are an all in one ferment & dispense. For hombrewers.

https://youtu.be/Qmjg0RiiB7M

The keykeg is different again.. Imo for industry.

https://www.keykeg.com/products/keykeg-10-liter/

Good find PeeBee. Once you have a coupler or two, and perhaps a supply of empties these could be really good. They need no gas, but you would need to invent a washer. Very similar technology to wine boxes.

[PeeBee]

The item pictured is intended as a keg. Their fermenter/kegs are clear PET.

But having had the source of these plastic kegs identified for me (Keg King, Australia) it appears I (or someone else discussing them) may have misinterpreted the descriptions ... they don't appear to have internal bags (they come with a PRV to fit on the inside of that pictured neck port), though looking at that "neck port" it appears the manufacturer has other intentions with that port (Key-Keg-like air dispense?).

[MashBag]

Do you have the link to the where they are being discussed.

[floydmeddler]

Fermenter King Junior looks great. Would hold up as a keg no probs, too I reckon. Smallest the do is 20L, though, it seems.

[floydmeddler]

Pressure sprayer arrived. I quickly got rid of the pump etc.

Happy with it so far. Really sturdy. Can handle up to 40PSI

Only thing I don't like is that black bit that has to go inside. Can't see any way round it ATM. Any ideas?

IMG_7682.jpg (1010.75 KiB) Viewed 8259 times

IMG_7684.jpg (514.59 KiB) Viewed 8259 times

IMG_7685.jpg (901.45 KiB) Viewed 8259 times

IMG_7686.jpg (553.31 KiB) Viewed 8259 times

IMG_7687.jpg (655.13 KiB) Viewed 8259 times

IMG_7688.jpg (638.68 KiB) Viewed 8259 times

IMG_7689.jpg (590.77 KiB) Viewed 8259 times

IMG_7690.jpg (613.66 KiB) Viewed 8259 times

IMG_7691.jpg (691.56 KiB) Viewed 8259 times

[floydmeddler]

IMG_7692.jpg (570.75 KiB) Viewed 8259 times

[PeeBee]

... Smallest the do is 20L, though, it seems.

Hence, I was featuring those "kegs" that do come as 10L. Same Aussie bunch making them, and they list "Brew2Bottle" as UK suppliers, but I see none on the B2B Website.

"Mashbag" wants this: 10L Minikeg / Cask - The Home Brew Forum (offsite link). You can see why I thought they had inner bags (and they might have!), but the bags would not be what was being asked for in the OP.

[clarets7]

Pressure sprayer arrived. I quickly got rid of the pump etc.

Happy with it so far. Really sturdy. Can handle up to 40PSI

Only thing I don't like is that black bit that has to go inside. Can't see any way round it ATM. Any ideas?

That's about as far as I got, I cut the bottom of the black bit off and was going to replace the inner red part with a flat plate fitted with a Schrader (?) valve. It never happened - I did consider a 3D printed replacement for the whole screw cap but, you've guessed, it never happened

But it is a sturdy piece of kit

[MashBag]

Only thing I don't like is that black bit that has to go inside. Can't see any way round it ATM. Any ideas?

Trillions. Hand Mouldable Thermoplastic.
Make whatever insert you need. Surprisingly easy stuff to use. Once cool its rock hard & drill-able.

https://amzn.eu/d/68J0N7c

[floydmeddler]

Trillions looks amazing. Never heard of it!

I already ordered some bits to seal the existing cap. Black dip pipe will be completely removed and (hopefully) after an o ring and a 43mm acrylic disc later, I should have a seal. Will update.