Triclamp to Corny

[Bigbud78]

Whats the best Tri clamp to corny connection type ? I bought a TC to 1/2" female fitting and a 3/8 Barb but have found its too big to get the beer line over it :/ Can't find a smaller barb on a 1/2" thread.

Any Idea's ?

[f00b4r]

If to have already spent the money on that try this.

[Bigbud78]

bob on, didnt see that !

Thanks

[jaroporter]

..or triclamp to male 1/2" bsp with a 1/2" john guest adaptor

.. or triclamp to corny disconnect adaptor

depending on what specifically you're wanting it for i guess

[keith1664]

I'm not entirely sure what you're after.... however

https://www.brewbuilder.co.uk/triclamp- ... -post.html

If you're trying to get beer into a keg then one of those with a beer line with grey connector on one end and black on t'other.

[Fil]

fwiw 3/8" OD beerline is 1/4" ID so 1/4" (6.4mm) hosetials are a snug fit..

for quick easy connections short lengths of thinner walled platinum cured silicone tube can be used as 'varable sized' friction fit connectors as long as the transfer pressure employed is nominal, and can be easily boiled for sanitation. browse ebay for suppliers of silicone tube to the dairy industry and enquire about some few inch long samples of different diameter tube h,humm

[borischarlton]

Hi,

We have the perfect option for you here:-

https://www.themaltmiller.co.uk/index.p ... uctId=3390