Floating dip tube for corny

A forum to discuss the various ways of getting beer into your glass.
McMullan
Under the Table
Posts: 1045
Joined: Tue Jul 14, 2015 7:48 pm
Location: Here

Re: Floating dip tube for corny

Post by McMullan » Fri Sep 25, 2020 6:48 pm

Don't use 5mm ID X 10mm OD silicone tubing with Caskwidge floats in a corny keg. Too rigid for narrow cornies therefore prone to getting jammed on the keg wall then sucking CO2. 6 to 6.5mm ID with a 1 to 1.5mm wall is more reliable. The tubing supplied by Caskwidge (roughly 5mm ID X 10mm OD) is designed for casks, which are much wider than corny kegs :roll:

McMullan
Under the Table
Posts: 1045
Joined: Tue Jul 14, 2015 7:48 pm
Location: Here

Re: Floating dip tube for corny

Post by McMullan » Fri Sep 25, 2020 7:03 pm



=D>

Post Reply