Pump Clips and Labels for Kegerator Taps

[ElthamBrewer]

Hi all,

Do people have any nifty and aesthetically pleasing solutions to labelling their taps on kegerators. I've been looking at a tower with 4x Nukataps. I've seen Kegland do a tap handle that allows you to put a picture on so I could print my own labels. I suppose the other option is the traditional chalk board somewhere nearby, or perhaps a tag hanging on a piece of string under the tap. The latter sounds a bit naff though - any great solutions?

Cheers,

[Madbrewer]

I love doing my own, generally I do a screen print of the preview, print it on an inkjet printer and laminate. Here's a link to the label design software:

https://www.beerlabelizer.com/

My labels tend to be on a noughtical/ naughty-cal theme similar to those politically incorrect 1970's post cards but with saucy beer names i.e. Ship Happens, Otter's Pocket, Dirty Oars etc etc. <- similar I guess to Skinners brewery in style.

If the taps are coming through the front of the front/ side wall of the kegerator I would then blue tack them in place appropriately. If you need to attach the the actual tap itself - I would either use cable ties to fasten it to the handle or fashion a hanging label somehow.

Am rubbish at posting photos here but the laminated idea works well with a hand pull beer pump. I fasten to the plastic label holder with Gel Tape. It works well.

[ElthamBrewer]

I am loving beerlabelizer, what a neat site and thanks for pointing out!
Think I might start then with printing on photopaper and with over a bit of wire or the like beneath the tap shank, and go jazzy from there.

[Nashbrew]

Having great fun with https://www.beerlabelizer.com/