- kl20220_-_pet_bottle_-_party_tapping_head.jpg (28.92 KiB) Viewed 3195 times
- 1072BE11-9890-4047-B9A0-E34AD56D0D81.jpeg (40.31 KiB) Viewed 3175 times
That’s pretty cool, any pictures? I’m thinking it would work pretty well linked in with a keg washer; wash with keg washer, rinse with your tap system and then sanitise afterwards with the rinsed out keg washer (good if you do a load at once).Jocky wrote:I made a gadget recently that allows me to put a ball lock post on my kitchen tap.
It means I can flush hot water through disconnects, lines etc without gas. That little pump thing looks great though.
More than one I think. There have been some great DIY hacks over the years.FUBAR wrote:Isn't there a topic on Jim's somewhere about converting a pump up sprayer to take a ball lock ? .
Having some problems posting pictures at the moment.f00b4r wrote: ↑Sat Dec 04, 2021 12:52 pmThat’s pretty cool, any pictures? I’m thinking it would work pretty well linked in with a keg washer; wash with keg washer, rinse with your tap system and then sanitise afterwards with the rinsed out keg washer (good if you do a load at once).Jocky wrote:I made a gadget recently that allows me to put a ball lock post on my kitchen tap.
It means I can flush hot water through disconnects, lines etc without gas. That little pump thing looks great though.
I have been thinking about this and assume that you are having to either build two or unscrew the fitting to switch between grey and black disconnects?Jocky wrote: ↑Sat Dec 04, 2021 8:17 pmHaving some problems posting pictures at the moment.f00b4r wrote: ↑Sat Dec 04, 2021 12:52 pmThat’s pretty cool, any pictures? I’m thinking it would work pretty well linked in with a keg washer; wash with keg washer, rinse with your tap system and then sanitise afterwards with the rinsed out keg washer (good if you do a load at once).Jocky wrote:I made a gadget recently that allows me to put a ball lock post on my kitchen tap.
It means I can flush hot water through disconnects, lines etc without gas. That little pump thing looks great though.
It’s basically just a post bulkhead (https://www.themaltmiller.co.uk/product ... -assembly/) threaded into a couple of bushes to get it up to 3/4” thread and then threaded into a hozelock style quick disconnect (https://www.amazon.co.uk/dp/B06Y16P4W9/).
I already had a hozelock style adapter for my kitchen sink tap (Flopro Threaded Mixer Tap Garden Hose Connector https://www.amazon.co.uk/dp/B01B8G23ZE/)