How do I get my Spraymalt to dissolve? HELP, QUICK!!

[farmhousekeg]

Hi....I have an URGENT problem with my spraymalt!!

I have just made up a Coopers Stout kit and added 1kg of Dark Spraymalt instead of sugar. I sprinkled it onto the wort as per instructions while stirring continuously. I got some lumps forming but thought I had got rid of them all. Now after 30 minutes in the FV it looks like there is a thick 1cm layer of Spraymalt in the bottom of my FV!!! Is this normal? I have never tried spraymalt before.

Should I stir it up again (yeast is now added).

Will the malt be digested by the yeast?

Are the sugars already dissolved?

What about the SG? I couldn't test it as I dropped and broke my Hydrometer this morning. SWMBO has gone to Wilko's for a new one.....bless 'er.

Any help will be gratefully received.

[edit1now]

Sanitise a big spoon, or even a rolling pin, and use it to break the lumps up a bit. They should gradually dissolve as the yeasties eat the sugar anyway.

[farmhousekeg]

Sanitise a big spoon, or even a rolling pin, and use it to break the lumps up a bit. They should gradually dissolve as the yeasties eat the sugar anyway.

Edit....thanks for the mega quick response. I did this just after I posted and it seems the sediment is pretty fine stuff, so I am hopefully not in too much bother. Gave it a stir and will keep an eye on it for the next few hours and gently stir again if needed.

Thanks again, good to know someone is "out there "!!

[edit1now]

someone is "out there"

...surfing for potential Christmas present list. What can I ask so-and-so for? A home-brewing book from Amazon of course (makes list of thirteen books he wants plus a cheese-making book )

...putting-off going out into a cold garage to cut a hole in the top of a (legit) stainless cask to turn it into a boiler.

...ordering screws and things from Screwfix.

...reading most of JBK (according to the TC-making department)

[farmhousekeg]

someone is "out there"

...putting-off going out into a cold garage to cut a hole in the top of a (legit) stainless cask to turn it into a boiler.

Go on you know you want to really.....

[Horden Hillbilly]

Farmhousekeg, the best way to mix spraymalt is to add it to lukewarm water in a pan, add the spraymalt, then bring it to the boil, as seen here. This prevents the "clumping", then you can mix it with your kit.

[chopperswookie]

i always use spraymalt with coopers stout and i have found to boil a kettle, once it has boiled pour it into you ferming bin and then add your spraymalt. stir for a good five to ten mins. then when its all disolved add your can.

elbow grease is the answer

[farmhousekeg]

Farmhousekeg, the best way to mix spraymalt is to add it to lukewarm water in a pan, add the spraymalt, then bring it to the boil, as seen here. This prevents the "clumping", then you can mix it with your kit.

i always use spraymalt with coopers stout and i have found to boil a kettle, once it has boiled pour it into you ferming bin and then add your spraymalt. stir for a good five to ten mins. then when its all disolved add your can.

elbow grease is the answer

Gents, many thanks for the answers. A great help and I will employ your advice on the next kit, which by the sound of the reputation of the Coopers Stout kit, is likely to be soon!

SWMBO has returned with a new hydrometer and the OG of a little sample I saved is 1043 at 16 degrees, so that's translates to about 1042 I think? Right?

[Pav]

I tried mixing mine in a jug of cold water. Sprinkle on top and mix as you add it. Works fine. Then add to brew.
I had the same problem of clumping when adding straight to the bucket.

[farmhousekeg]

Just a quick update all.....thanks for all your input......FV has now been bubblin' like a good un for 2 days. However next time I'll implement some of your advice on mixing Spraymalt to save my nerves!

Thanks again