Kit Failure

Discuss making up beer kits - the simplest way to brew.
Vossy1

Post by Vossy1 » Mon Jul 31, 2006 12:40 am

It now looks like I had an infection in my beer. I went into my HBS for supplies and apparently a few people in my area have had the same problem......conspiracy theorist have a field day.

Same water supply, bacteria that are prevelant at this time of year...whatever.

Interestingly he did say that some beers can display this "phenolic" taste/odour but that it can dissappear with maturation. He also suggested that I should be wary as I am probably hypersensitised to it now that I've experienced it.
Rack on and see what happens, was the order of the day.

I've got a Nelsons Revenge and another Fixby Gold waiting to go, as soon as my chillers done. Also got a Coopers IPA coming. It should have been here last Friday. Apparently the IPA may be getting discontinued though not sure yet.

Vossy1

Post by Vossy1 » Mon Jul 31, 2006 7:49 am

I still think it was the temp as well DaaB.

It wasn't a vinegar taste, it was far harsher. No sourness, just an overwhelming, raw, harsh, chemical taste. I might buy some nasty cheap brandy to compare :rolleyes:

I think the point the bloke was trying to make with regard to the off smell was that similar smell/tastes can be given off during fermentation that aren't necessarily due to an infection and that these mellow with maturation.

I recently had a couple of brown ales that I would descibe as disgusting, to the point of making me want to be sick. They tasted and smelt of tuna, however that was just a trait of those beers. If I had brewed them myself I would definately had said they were bad.

Oh well happy days, time to make a couple more kits today. Nelsons Revenge and another Fixby Gold.....fingers crossed :unsure:

PieOPah

Post by PieOPah » Mon Jul 31, 2006 8:04 am

QUOTE (Vossy1 @ Jul 31 2006, 07:49 AM) I recently had a couple of brown ales that I would descibe as disgusting, to the point of making me want to be sick. They tasted and smelt of tuna, however that was just a trait of those beers. If I had brewed them myself I would definately had said they were bad.
Who would try to sell a tuna tasting beer? That is disgusting!! Wonder what grain they use to give it that characteristic :)

confused

Post by confused » Mon Jul 31, 2006 10:09 am

QUOTE (Daft as a Brush @ Jul 31 2006, 07:10 AM)Have a look at this page on the How 2 Brew website

http://www.howtobrew.com/section4/chapter21.html




Loved this section from your link DaaB,

"Cause 2: Gusher Infection However, the sustained bubbling is often due to "gusher type" infection. These infections can occur at any time and are due to wild yeasts or bacteria that eat the higher order sugars, like dextrins. The result in the fermentor is a beer that keeps bubbling until all of the carbohydrates are fermented, leaving a beer that has no body and very little taste."

now I understand how they brew John Smiths!

Bigster

Post by Bigster » Mon Jul 31, 2006 10:54 pm

QUOTE Did you use a building supplier Bigster?

Not sure what he was but very friendly , C S Manufacturing in Bristol, recommended by a company after I googled polystyrene.
Sure you must have something similar up your street :D

Vossy1

Post by Vossy1 » Mon Jul 31, 2006 11:32 pm

PoP, Here you go so you can try for yourself. From my own spreadsheet. Beer type, Origin, Brewery, Strength, Rating :out Description

Porter Scotland Black Isle 4.5% 0 Brewed with dark roasted malts, rich medium dry ruby black beer. Excellent with fish. Smelt of coffee on opeing which turned to a smell of rotting tuna whilst drinking, so threw half away.

I was so disgusted with the other one that I didn't even add it to the spready. I will never forget that taste and wont make that mistake twice. It was called Mann's Brown Ale. It had a description on the back label that said it was ideal to make gravy with :out :out

I think it was gravy :out fishy at that :out :out :out

Cheers bigster, all sorted now.

DaaB, like the otter :lol: its so bad its good :P

There's confirmation of the phenolics and high temperature, thanks DaaB.
Hopefully a lesson learned never to be repeated.

hairytoes

Post by hairytoes » Tue Aug 08, 2006 7:05 pm

I've just did my 1st kit & it's doing it's fermenting in the kitchen too Vossy, now you've got me sheetin' meself, as I'm bloody looking forward to it.
I only had 500g of spraymalt & it asked for 1kg, I didn't want to thin it with sugar, I don't have a local HBS so I went to the health food shop & popped in 2 jars of malt extract + 400g of the spraymalt (the rest is for priming). It was a brewpak 80 bob & it's going nicely, looks nice & dark the way I like mama!! ;)
But now I'm worried as it's been quite hot up here & the kitchen is the hottest room in the house. ?
Do you think I should do the 2nd fermentation in the garage? think it will be a wee bit cooler!
I'd freak ma tits if it was to all go down the toilet!!! :angry:
Before I've drank it that is :P

Vossy1

Post by Vossy1 » Tue Aug 08, 2006 8:38 pm

I agree with everything DaaB said, but would like to add one thing.....moooooveee itttttttt.......... to somewhere cooler if you can...its not woth the risk, hard work or money to leave it somewhere too hot....I know.



Fusel alcohol hey....you ol fox :P

hairytoes

Post by hairytoes » Tue Aug 08, 2006 9:41 pm

cheers guys, that baby's going in the garage tonight.....she will be pleased!!! I'll tell her it was to please her ;)
I'm going to make myself like this beer as it's ma 1st yin!! Just hope I don't have to drink it through gritted teeth!

hairytoes

Post by hairytoes » Wed Aug 09, 2006 6:28 pm

Thanks again guys as i would be really upset if my 1st brew (albeit a kit) failed.
With regards to fermenting temp, I now know that above 26 degrees is a nono, but is there a minimum temp I should be aware of, as I've placed it in the garage - along with my TC & TW. Being Scotland the temp has now dropped significantly compared to the last few weeks, so will this have an adverse effect??
Maybe that's what caused my TC to smell like the inside of Ghandi's flipflop (no offense intended, Ghandi's a great hero of mine, it's just that I hear his flipflops smell like my Turbo Cider!!)
Here's another go at posting a piccy of said smelly TC:

Image

ps it's now bottled & hasn't yet exploded, I will try it on Friday night - due to reading the adverse effects it can have on my employment if I drink it on a week night. :bonk

< low & behold the power of technology, just be glad the CIA ain't revealed their smellyvision on us yet!! :P

Vossy1

Post by Vossy1 » Wed Aug 09, 2006 7:43 pm

Hi HT, There is a link on this site somewhere, probably in the yeast section that lists most yeasts and their optimum and maximum temaperatures.

Most of the yeasts I've come across should be fermented between 18 and 20 deg c. Keep in mind though that due to the fermentation process the liquid will be a couple of degree's higher in temp than the surroundings.

Thats why a lot of the folks keep their ken schwartz type chillers at 17.5 - 18 deg roughly.

Hope this helps

Edit:- here's the link http://byo.com/referenceguide/yeaststrains/index.html

hairytoes

Post by hairytoes » Wed Aug 09, 2006 10:30 pm

As the temp has cooled right down up here, I think I'll bring it in at night & take back out again in the morning. Just the 25L of beer.
The demijohns & wine/cider can cope with the cold & hopefully this will help to clear them even further (??? you think so???)
Hard luck on hearts, I thought they might just scrape it!

hairytoes

Post by hairytoes » Mon Aug 14, 2006 10:09 pm

Wee bit of advice required here chaps. My kit finished it's 1st fermentation & I promptly syphoned into the secondary fermenter with an airlock. While I was doing this through the transparent tubing I could see globs of crud passing into the secondary bin.
The kit recommends another 2 days in this bin, before barrelling.
How can I ensure that the crud doesn't get into my barrel, I realise I should've strained it through a muslin bag, but how can I easily do this while maintaining a slow flow into the barrel (4" cap) & therefore not causing splashing?

hairytoes

Post by hairytoes » Tue Aug 15, 2006 2:36 pm

Ahaaa, I don't use a racking cane,,,in fact never heard of one before...JEEEZ!!
If I understand correctly, I can get a short copper length of tubing (sterelized) attatch a (sterelized) S/S pot scrubby to the bottom of the pipe with some pretty thick (how I feel), copper wire (sterelized).
I then can attatch the syphon tubing to the top of the copper pipe & use my mad looking upside down microphone or tickling stick looking thing (also known as a racking cane) to draw beer from one bin into another.
Which isn't even really essential as I can just leave it all in the same bin for 10 days & then rack into a keg, using the above method!
DaDa EASY!!
Anyway beer smells, looks & tastes ok so far - had a wee sneaky taste!! Getting excited, fingers crossed!! :beer

Post Reply