anyone got a recipe for CH'TI ambere ?

Try some of these great recipes out, or share your favourite brew with other forumees!
Post Reply
tubby_shaw

Post by tubby_shaw » Thu Feb 15, 2007 5:17 pm

ColinKeb wrote::lol: i think theres some kind of electromagnetic surge near me thats sent all my gear up the spout. ive tested the thermometer on ice which is apparently 34 degrees C ! ah well at least something alcoholic will come out the other end :)
Yup definately pregnant :(
Top
maxashton

Post by maxashton » Thu Feb 15, 2007 5:28 pm

Someone testing EMP weaponry nearby...

If you're in northamptonshire, i did let one rip earlier that might have caused electronic pulses.
Top
steve_flack

Post by steve_flack » Thu Feb 15, 2007 7:35 pm

ColinKeb wrote:: ive tested the thermometer on ice which is apparently 34 degrees C !
Are you sure it's in celcius? 32 is the melting point of ice in Fahrenheit
Top
User avatar
Andy
Virtually comatose but still standing
Posts: 8716
Joined: Fri Nov 18, 2005 1:00 pm
Location: Ash, Surrey
Contact:
Contact Andy

Post by Andy » Thu Feb 15, 2007 7:40 pm

maxashton wrote:Someone testing EMP weaponry nearby...

If you're in northamptonshire, i did let one rip earlier that might have caused electronic pulses.
:lol:

Hey Max, whereabouts in Northants are you. I originally come from Rushden (but left there years ago), still have family there so visit every now and again.
Dan!
Top
ColinKeb

Post by ColinKeb » Thu Feb 15, 2007 7:41 pm

i thought that , but its definintely on celcius, maybe its got the two confused . i think i will just get a simple floating one its probably more reliable.
Top
User avatar
Andy
Virtually comatose but still standing
Posts: 8716
Joined: Fri Nov 18, 2005 1:00 pm
Location: Ash, Surrey
Contact:
Contact Andy

Post by Andy » Thu Feb 15, 2007 7:44 pm

I've been through two digital thermometers which after getting wet constantly read too high. DaaB's had this and managed to dry them out but both of mine were knackered.
Dan!
Top
ColinKeb

Post by ColinKeb » Thu Feb 15, 2007 9:21 pm

that looks perfect, where would i get a compression fitting like that ?
Top
ColinKeb

Post by ColinKeb » Thu Feb 15, 2007 11:21 pm

cheers. theres some very interesting stuff in there , thank god i havent got a set of metal boilers etc i'd spend a fourtune :)
Top
ColinKeb

Post by ColinKeb » Fri Feb 16, 2007 10:24 am

yep found it, btw my experiment of a stepped mash vs a striaght one , well i used the stepped mash for this one but in with that amount of grain adding boiling water will not raise the temp enough so you have to try and use the element . this burns the grain then it fails on you during the boil. bottom line is i am never doing a stepped mash again as long as i live it causes too many problems :) experiment over :lol:
Top
Post Reply

Return to “Beer Recipes”