Make sure your balls are stainless.

The forum for discussing all kinds of brewing paraphernalia.
Post Reply
User avatar
LeeH
Under the Table
Posts: 1923
Joined: Wed Jan 11, 2012 9:42 pm
Location: North Lincs
Contact:
Contact LeeH

Make sure your balls are stainless.

Post by LeeH » Wed May 22, 2019 5:28 pm

Never trust what you buy is what you get.

Luckily my keg blocked up due to my hop bag coming open in the keg so not much was consumed.

F me...if I’m not online next week I’ve died of ball bearing poisoning. Image


Sent from my iPhone using Tapatalk Pro
Last edited by LeeH on Wed May 22, 2019 5:28 pm, edited 2 times in total.
Sabro Single Hop NEIPA 25/02/20 CLICK ME to monitor progress with Brewfather & iSpindel
Top
DaveGillespie
Tippler
Posts: 16
Joined: Thu Sep 06, 2018 9:28 am

Re: Make sure your balls are stainless.

Post by DaveGillespie » Mon May 27, 2019 10:33 am

Is that a float? Where'd you get it?
Top
Robwalkeragain
Hollow Legs
Posts: 374
Joined: Tue Jun 05, 2018 9:19 am

Re: Make sure your balls are stainless.

Post by Robwalkeragain » Mon May 27, 2019 1:42 pm

Ebay is terrible for this - try to use reputable suppliers!
Top
User avatar
Kev888
So far gone I'm on the way back again!
Posts: 7701
Joined: Fri Mar 19, 2010 6:22 pm
Location: Derbyshire, UK

Re: Make sure your balls are stainless.

Post by Kev888 » Mon May 27, 2019 7:16 pm

If the seller just said 'stainless steel' and didn't specify the grade or composition, then that allows for quite a range - including lower grades than we would want for brewing. But even so, there are limits (e.g. 10.5% chrome or more); if I'm judging from the photo correctly there might be more damage than one would expect after a single use, so it could well have been a mistake (or lie) for the material to be called this at all.

By way of comparison, if it were a standard bearing then it would most likely be made of chrome steel - which in a sense is heading towards stainless steel and (being excessively charitable) could possibly be confused. But it normally has only a fraction of the chrome content (say 1.5%) than any of the so-called stainless grades should have (let alone the good ones (ditto for molybdenum)) and so no cosha retailer would call it so.
Kev
Top
User avatar
PeeBee
Under the Table
Posts: 1692
Joined: Thu Jan 21, 2016 2:50 pm
Location: North Wales

Re: Make sure your balls are stainless.

Post by PeeBee » Tue May 28, 2019 12:24 pm

Robwalkeragain wrote: ↑
Mon May 27, 2019 1:42 pm
 Ebay is terrible for this - try to use reputable suppliers!
That's a bit unfair on those reputable suppliers that do use eBay!

But with eBay, it is up to the buyer to figure out who is reputable. These will help: https://www.ebay.co.uk/itm/50-80mm-Clea ... UIaWg3YlhQ - guaranteed :---)
Cask-conditioned style ale out of a keg/Cornie (the "treatise"): https://drive.google.com/file/d/0BwzEv5 ... rDKRMjcO1g
Water report demystified (the "Defuddler"; removes the nonsense!): https://drive.google.com/drive/folders/ ... sp=sharing

Downloads are not available while they undergo enhancement and modification ... 1/1/2025
Top
WalesAles
Falling off the Barstool
Posts: 3914
Joined: Thu Jan 24, 2013 11:07 pm
Location: South Wales UK.

Re: Make sure your balls are stainless.

Post by WalesAles » Tue May 28, 2019 8:30 pm

[quote=PeeBee post_id=843809 time=1559042672 user_id=1627
But with eBay, it is up to the buyer to figure out who is reputable. These will help: https://www.ebay.co.uk/itm/50-80mm-Clea ... UIaWg3YlhQ - guaranteed :---)
[/quote]

Pee,
They can`t be that good, no pics of Beer anywhere, upside down or not! #-o
Ooooooh! Pictures of my Beer upside down, that sounds good!:D
Or shall I just rotate the pic and save some cash.

WA

Sent without Taptotork.
Top
Post Reply

Return to “Brewing Equipment”