frothy HERMS 27.10.06

[Frothy]

Ready for the preliminary stages of testing, I'm still waiting for some food grade 1/2" hose that fits the hozelock fittings before it can be put to proper use.



The HLT tap isn't connected yet ( I may replace it for a WD heatproof tap) but the idea is to use a quick connect system so that the single pump can also be used to pump the sparge water. All flow can be regulated using the white tap on the pump outflow.
http://www.willmottw.fsnet.co.uk/brew/HERMS/

HE is using 25m of 8mm microbore


Matt

[Frothy]

here you go DAAB magnetically coupled, food & hot water safe although I don't know what it will lift.
http://cgi.ebay.co.uk/SERVIS-ELECTRA-WH ... dZViewItem

Matt

[Andy]

here you go DAAD...

[Andy]

here you go DAAD magnetically coupled, food & hot water safe although I don't know what it will lift.
http://cgi.ebay.co.uk/SERVIS-ELECTRA-WH ... dZViewItem

Matt

although I don't know what it will lift.

Frothers, from your pictures it needs to cope with a 2 metre head unless you rearrange the setup...

Have you tested with water only yet ?

[Frothy]

whoops typo
not yet, just sorting some wire for the pump which will ideally be mounted on a board just under the mash tun tap.

Matt

[Seveneer]

Looking good Frothy.

[Vossy1]

Nice work Frothers

Keep us posted on the testing results