CO2 REGULATOR

The forum for discussing all kinds of brewing paraphernalia.
Post Reply
Mulberry

CO2 REGULATOR

Post by Mulberry » Tue Oct 03, 2006 7:18 am

HI ANY IDEAS AS TO WHERE TO GET AN IN EXPENSEIVE REGULATOR
- SHROPSHIRE OR MAIL ORDER

Zebra

Post by Zebra » Tue Oct 03, 2006 8:14 am

I've got most of that kind of stuff when it's being chucked out by pubs. It's amazing what lying around unused in cellars or what gets chucked out during refits. Are you friendly with any local landlords?

norman

Post by norman » Tue Oct 03, 2006 11:57 am

Tr y this firm the will make up a regulator to any pressures you want,cost me £30 and it works fine.Single stage 2 gauges.

norman

Post by norman » Tue Oct 03, 2006 11:57 am

Tr y this firm the will make up a regulator to any pressures you want,cost me £30 and it works fine.Single stage 2 gauges.
SORRY missed the link off.
http://www.freshfordltd.co.uk/

Frothy

Post by Frothy » Tue Oct 03, 2006 4:58 pm

I recommend DTS
http://www.beer-coolers.co.uk/
Geoffs another one of these guys who also has an ebay shop but you can buy direct- basically he has a workshop where he reconditions beer coolers and can get hold of any kind of dispense equipment.

Matt

niall

Post by niall » Wed Oct 04, 2006 3:57 pm

I haven't connected my regulator up yet - I ordered the CO2 regulator (lightweight) from here as it was the cheapest I saw online:

http://www.thewelderswarehouse.com/acat ... _Gear.html

It states that it has two gauges - one for cylinder contents, the other for gas flow rate. On getting this I noticed that one of the gauges is in PSI (although it goes up to several hundred) and the other is in Lines/Min. Has anyone else used this regulator or similar or do the gauges need to be changed?

User avatar
Andy
Virtually comatose but still standing
Posts: 8716
Joined: Fri Nov 18, 2005 1:00 pm
Location: Ash, Surrey
Contact:

Post by Andy » Wed Oct 04, 2006 4:03 pm

A few people have changed the flow gauge to a pressure one.

DaaB has a few links to suppliers....
Dan!

niall

Post by niall » Wed Oct 04, 2006 4:16 pm

Gimme links, Gimme links :)

niall

Post by niall » Thu Oct 05, 2006 10:05 am

Cheers DaaB, I've emailed Johnson Valves, will let you know how I get on!

niall

Post by niall » Thu Oct 12, 2006 4:18 pm

I contacted www.pressuregauge.co.uk who put me in touch with a company called Rototherm in Dublin, I presume they're linked in some way. Anyway I'm about to confirm an order for a 0-60 PSI bottom mounted 40mm gauge - does this sound right?

niall

Post by niall » Fri Oct 13, 2006 10:29 am

Cheers - I think I ordered 1/8" , hopefully it's the right one, if not they said it's no problem to return it.

Scooby

Post by Scooby » Fri Oct 13, 2006 3:43 pm

norman wrote:Tr y this firm the will make up a regulator to any pressures you want,cost me £30 and it works fine.Single stage 2 gauges.
SORRY missed the link off.
http://www.freshfordltd.co.uk/
I phoned them and was quoted £45.95+vat +pp Single stage, twin gauge 0-4 bar

Post Reply