Refurbing Handpumps

The forum for discussing all kinds of brewing paraphernalia.
Post Reply
The Fat Jedi

Refurbing Handpumps

Post by The Fat Jedi » Sun Jul 10, 2011 3:13 pm

New to the forum so not sure I'm putting this in the right place... :oops:

I have a couple of handpumps which I use fairly regularly. I wanted to refurb them as they are beginning to fob the beer on dispense. I'm presuming I'm going to need to replace seals etc and was wondering a couple of things...

1) How easy is it to service them yourself (I'm fairly hopeless at DIY :? )
2) Where can I buy all the requisite seals and valves I'm likely to need?

Any and all help and advice gratefully received! :D

User avatar
Steve1262
Piss Artist
Posts: 109
Joined: Wed Mar 12, 2008 1:38 am
Location: Bridlington, East Yorkshire. 10 Miles From Wold Top Brewery

Re: Refurbing Handpumps

Post by Steve1262 » Sun Jul 10, 2011 4:32 pm

Hi.
I refurbed mine and providing you are methodical about where you put everything as you dismantle you should be able to DIY as there's not usually a lot to them inside.
Mine didn't have a lot on the outside that identified what it was so I took some photo's and e-mailed them to Colin Farrah's brewery services and they quickly answered and supplied the correct seal kit and is now working fine.
I think beerengines.com is a similar service.

:=P
Ginger Cat Home Brewery
Image

My assistant brewer "Frank"

"Four wheels move the body. . . . Two wheels move the soul"

simco999

Re: Refurbing Handpumps

Post by simco999 » Sun Jul 10, 2011 4:38 pm

Welcome to Jims - don't worry about posting in the wrong place - it's the right place BTW IMHO.

Jim's is a pretty relaxed board - not like other forums!!!

GARYSMIFF

Re: Refurbing Handpumps

Post by GARYSMIFF » Mon Jul 11, 2011 7:03 pm

Colin Farrah's brewery services sorted me out with the ferrite seal for my angram now its spiffing

User avatar
flytact
Drunk as a Skunk
Posts: 759
Joined: Wed Oct 04, 2006 6:31 pm
Location: Annapolis, MD - USA

Re: Refurbing Handpumps

Post by flytact » Tue Jul 12, 2011 12:38 pm

Another recommendation for Colin Farrah. They deciphered a drawing I sent them and helped me out, even though they were not going to benefit from their guidance.
Johnny Clueless was there
With his simulated wood grain

The Fat Jedi

Re: Refurbing Handpumps

Post by The Fat Jedi » Tue Jul 12, 2011 7:55 pm

Thanks for the advice all! Colin Farrar it is. I'll drop them a line and see what happens.

Cheers.

Post Reply