Here's how I did mine. I used a lugged power supply from Maplins. I cut the 12v coaxial plug off so I could wire it into the controller. The lugged AC power supply is pretty nigh on waterproof as it is contained in a sealed unit. AC adapter, controller and pump are mounted on a small block of marine ply. I always put the block on the floor with the AC lead going upwards to the mains socket. Never get any wort into the AC lines.
Question for solar pump enthusiasts?
Re: Question for solar pump enthusiasts?
I use a pair of LM217, wired up inside a project box. they are powered by a 24V Dell laptop power supply. There are then 2.1mm connectors to output to the the pumps.
seems to work fine. the heat sinks get hot though.
seems to work fine. the heat sinks get hot though.