maxi cooler parts

graemet · Post by **graemet** » Tue Jul 30, 2013 10:06 pm

don't suppose any of you know where i can get a replacement for the red overflow bung on a maxi cooler? i've yet to test the one i got a few days ago, as it has no overflow bung, and i'd rather not flood the place if i can avoid it

Fil · Post by **Fil** » Tue Jul 30, 2013 11:49 pm

lost mine too... my solution was a length of automotive silicone tube i managed to fit onto the overflow.
when filling i drop the silicone tube into a bucket, when done pouring out, i just lift up the tube and wedge it in place pointing up.

Its the blue hose wedged between the power box and shelf support

graemet · Post by **graemet** » Wed Jul 31, 2013 7:32 am

Genius! I'd never have come up with that solution

Fil · Post by **Fil** » Wed Jul 31, 2013 11:32 pm

actually 8mm id silicone tube off ebay squeezed into the drain hole not onto.. took a bit of wiggling to get it to sit in without a kink
fyi automotive silicone tube ISNT foodsafe

thanks for the kind words but not genius, genius would have been sitting the thing so the drain and pipes were accessible not backed up against a wall,and not under a shelf i needed to drill a hole in so i could fill the chiller..

Jim's Beer Kit

Practical Homebrewing

HomeBrew Forum

Sponsored by BREW-SCHOOL

maxi cooler parts

maxi cooler parts

Re: maxi cooler parts

Re: maxi cooler parts

Re: maxi cooler parts