Twas a few nights before Christmas and all through the brewery not an element was firing, not even the HERMS,
The system was checked with the greatest of care, with the hope that soon beer would be brewed in there,
Despite the help of a forum so great, the builder thought brewing would not be his fate
But after hours of trying with multimeter and prong,
It seems that the SSRs were the thing that were wrong...
In short I had AC input SSRs but managed to swap them from some DC ones I had and it all works!
Thanks everyone for your help, now I just have to calibrate it and it will be brewday!
[FIXED] Electric Brewery Problem - Elements won't work
Re: Electric Brewery Problem - Elements won't work
Last edited by och29 on Mon Dec 23, 2013 6:06 pm, edited 1 time in total.
Drinking: AG#7 Final Sprint (APA), AG#8 Buckwheat Brett (Saison - Saison/Brett), AG#9 Helles Meister
Conditioning: -
Fermenting: Selection Pinot Grigio
Planning: Orange Blossom Mead, Mexican Honey Mead, Chocolate Stout
Conditioning: -
Fermenting: Selection Pinot Grigio
Planning: Orange Blossom Mead, Mexican Honey Mead, Chocolate Stout
-
- Telling imaginary friend stories
- Posts: 5229
- Joined: Sun Oct 16, 2011 1:49 pm
- Location: Cowley, Oxford
Re: [FIXED] Electric Brewery Problem - Elements won't work
Result!! get some pic posted of it all in order
ist update for months n months..
Fermnting: not a lot..
Conditioning: nowt
Maturing: Challenger smash, and a kit lager
Drinking: dry one minikeg left in the store
Coming Soon Lots planned for the near future nowt for the immediate
Fermnting: not a lot..
Conditioning: nowt
Maturing: Challenger smash, and a kit lager
Drinking: dry one minikeg left in the store
Coming Soon Lots planned for the near future nowt for the immediate
Re: Electric Brewery Problem - Elements won't work
themadhippy wrote:definitelyCode: Select all
Do you think it's worth connecting a wire from the output of (for example) the HERMS SSR to one side of the HERMS output plug and a wire from the other side of the output plug to the neutral bus?
wanna bet ,although without a load there shouldnt be.,but the meter becomes the loadyou shouldn't get 240v as they are the same potential
You've just blown my mind. I've had this argument and won countless times. And proved it on a light switch.
Re: [FIXED] Electric Brewery Problem - Elements won't work
Here it is!Fil wrote:Result!! get some pic posted of it all in order
Just finished calibrating the PID/HLT, thought 2315 was a bit late to start on the HERMS/Mash Tun! All being well I'll aim for a Boxing Day brew!
Drinking: AG#7 Final Sprint (APA), AG#8 Buckwheat Brett (Saison - Saison/Brett), AG#9 Helles Meister
Conditioning: -
Fermenting: Selection Pinot Grigio
Planning: Orange Blossom Mead, Mexican Honey Mead, Chocolate Stout
Conditioning: -
Fermenting: Selection Pinot Grigio
Planning: Orange Blossom Mead, Mexican Honey Mead, Chocolate Stout