Quick question... does a domed false bottom like this
http://www.angelhomebrew.co.uk/en/acces ... ottom.html
just sit, unattached, on the bottom of the tun? Does it need to fit flush to the sides? The false bottom is 12 inches in diameter, my tun/kettle is just short of 14 inches. Will this work?
Thanks
fitting a domed false bottom
Re: fitting a domed false bottom
Hi
I have sent you a message
Cheers
Chris
I have sent you a message
Cheers
Chris
BossTronix 1 15 gallon pot brewery
2 x 7 gallon SS Brewtech Chronical
6 x Corny Kegs
in Keg 1 - Black Lager
in Keg 2 - Raspberryade
in Keg 3 - Devil's Backbone Clone
in Keg 4 - empty
in keg 5 - empty
in keg 6 - empty
Tap 1 - Black lager
Tap 2 - Raspberryade
2 x 7 gallon SS Brewtech Chronical
6 x Corny Kegs
in Keg 1 - Black Lager
in Keg 2 - Raspberryade
in Keg 3 - Devil's Backbone Clone
in Keg 4 - empty
in keg 5 - empty
in keg 6 - empty
Tap 1 - Black lager
Tap 2 - Raspberryade
- alix101
- Under the Table
- Posts: 1786
- Joined: Sun Jun 12, 2011 9:34 am
- Location: Chester-le-street Durham
Re: fitting a domed false bottom
You possibly already have the answers,but yes it just sits unattached,and no it doesn't need to fit tight mine sits in the bottom of a 70l thermo pot and works really well with little dead loss.
"Everybody should belive in something : and I belive I'll have another drink".
- angelHomeBrew
- Piss Artist
- Posts: 133
- Joined: Fri Mar 22, 2013 1:41 am
- Location: Chesterfield
- Contact:
Re: fitting a domed false bottom
That's right just sits on the bottom. There's some information on it here
http://www.angelhomebrew.co.uk/en/conte ... d-use-tips
http://www.angelhomebrew.co.uk/en/conte ... d-use-tips
- Jocky
- Even further under the Table
- Posts: 2738
- Joined: Sat Nov 12, 2011 6:50 pm
- Location: Epsom, Surrey, UK
Re: fitting a domed false bottom
It sits loose in my thermopot too.
If you don't want the elbow and hose barb in the middle you can replace it with a 1/2" BSP Hex Plug:
http://www.angelhomebrew.co.uk/en/taps- ... -plug.html
If you don't want the elbow and hose barb in the middle you can replace it with a 1/2" BSP Hex Plug:
http://www.angelhomebrew.co.uk/en/taps- ... -plug.html
Ingredients: Water, Barley, Hops, Yeast, Seaweed, Blood, Sweat, The swim bladder of a sturgeon, My enemies tears, Scenes of mild peril, An otter's handbag and Riboflavin.