Ok kind of should be on the wanted forum.
I'm looking for new hose to go into my beer gun does anyone know where to get any with the fittings attached or if anyone has an accessory pack.
It seems to me everything Blichmann is out of stock.
Blichmann beer gun accessory pack.
- alix101
- Under the Table
- Posts: 1786
- Joined: Sun Jun 12, 2011 9:34 am
- Location: Chester-le-street Durham
Blichmann beer gun accessory pack.
"Everybody should belive in something : and I belive I'll have another drink".
-
- Drunk as a Skunk
- Posts: 904
- Joined: Tue Jan 15, 2013 11:42 am
- Location: Newton-le-Willows ( St Helens/Warrington)
Re: Blichmann beer gun accessory pack.
I have a Chinese clone, there is the gun it's self and two lengths of PVC tubing and that's about it.
I have attached a Corny disconnect to beer line and coupled the gas line to a gas supply and that's all it needs.
All the parts can be obtained via the bay, 2 or 3 tube clips, 2 x 2 M of PVC tube to push fit onto the beer gun, 1 x disconnect and then what ever you want to enable connection to the gas line. That might be a "Tee" in the gas line, a valve and a pair of hose tails.
The sizes of the Tee valve and hose tails depend on the size of the tube your using.
If you have been using the gun you will have the fittings why not clean/sanitise them and just replace the tubing?
ATB. aamcle
I have attached a Corny disconnect to beer line and coupled the gas line to a gas supply and that's all it needs.
All the parts can be obtained via the bay, 2 or 3 tube clips, 2 x 2 M of PVC tube to push fit onto the beer gun, 1 x disconnect and then what ever you want to enable connection to the gas line. That might be a "Tee" in the gas line, a valve and a pair of hose tails.
The sizes of the Tee valve and hose tails depend on the size of the tube your using.
If you have been using the gun you will have the fittings why not clean/sanitise them and just replace the tubing?
ATB. aamcle