Sankey spares

[simpleton]

Morning.

Anyone know where I can buy the NRVs for re beer line? I have a few couplers and a few appear to be missing them . Have managed to track down the the little rubber gas side duck bill thingys.

Failing this do corny posts have NRV in them? As I see malt miller sells posts you can screw the E beer like of the Sankey connector and use corny disconnects of which I have a few.

Cheers
Si

[Heron1952]

MM sankeys have 5/8 couplings most ebay sankeys have 1/2 couplings so check first with Rob

[chris2012]

I'm not quite sure what you mean, is it the little ball in the beer side of the sankey coupler?

[Heron1952]

No the threads on the coupler usually with John Guest fittings. MM sells posts with 5/8 threads which fit the Sankey couplers that he sells.
https://www.themaltmiller.co.uk/product ... 58-thread/
https://www.themaltmiller.co.uk/product ... 58-thread/

[chris2012]

Sorry that question was for simpleton. I may be wrong, but I thought the NRV is just a ball in the coupler, or at least that's the only thing I noticed in the beer part of the coupler.

[alexlark]

You can get John Guest fittings that also incorporate a NRV. They have a brass thread on one side and a push fit on the other. I use them, they replace the ball and duck valve and are excellent quality.

Edit: like this (for beer): http://www.johnguest.com/product/inch-s ... t-adaptor/

Just make sure you check if your coupler is 1/2 inch first.

And this one is for gas:
http://www.johnguest.com/product/inch-s ... t-adaptor/

[Heron1952]

https://www.aquacure.co.uk/john-guest-adaptors/page/2
Not cheap though

[simpleton]

Yeah the little ball and spring retainer. I appear to have lost some

[chris2012]

I'm also missing a ball for a coupler I bought a while ago. I've just been doing a little googling, but can't seem to find anyone selling spares at the moment.

Apart from :
https://global.kegworks.com/draft-beer/ ... pler-parts

Which doesn't help, as they're in the US.

[Dave S]

https://www.aquacure.co.uk/john-guest-adaptors/page/2
Not cheap though

A bit cheaper from Stonhelm

and Beer out

[alexlark]

There are a few Sankey couplers on eBay for £24 / £25 that come with those JG fittings too.

[Heron1952]

Thanks for reminding me about Stonhelm, just down the road from me. They also do the DSI and te Micromatic gas non return duckbill inserts. I've a couple need replacing.

[jaroporter]

the john guest keg outlet adaptors do not have a NRV in them. only the gas inlet ones do

[joe1002]

https://www.ebay.co.uk/itm/5-x-beer-cou ... SwY99ZkbnW

[MonsieurBadgerCheese]

Afternoon,

Would anyone know of an European supplier for the O-Rings to fit the spear valve of an S (European) type Sankey Keg? It seems that the part is;

Taprite 45-0017-00

I have spent an age with Googgle, but can only find suppliers in the States. Thanks in advance.

MBC