Sankey spares
Sankey spares
Morning.
Anyone know where I can buy the NRVs for re beer line? I have a few couplers and a few appear to be missing them . Have managed to track down the the little rubber gas side duck bill thingys.
Failing this do corny posts have NRV in them? As I see malt miller sells posts you can screw the E beer like of the Sankey connector and use corny disconnects of which I have a few.
Cheers
Si
Anyone know where I can buy the NRVs for re beer line? I have a few couplers and a few appear to be missing them . Have managed to track down the the little rubber gas side duck bill thingys.
Failing this do corny posts have NRV in them? As I see malt miller sells posts you can screw the E beer like of the Sankey connector and use corny disconnects of which I have a few.
Cheers
Si
Re: Sankey spares
MM sankeys have 5/8 couplings most ebay sankeys have 1/2 couplings so check first with Rob
aka Rhys
Re: Sankey spares
I'm not quite sure what you mean, is it the little ball in the beer side of the sankey coupler?
Re: Sankey spares
No the threads on the coupler usually with John Guest fittings. MM sells posts with 5/8 threads which fit the Sankey couplers that he sells.
https://www.themaltmiller.co.uk/product ... 58-thread/
https://www.themaltmiller.co.uk/product ... 58-thread/
https://www.themaltmiller.co.uk/product ... 58-thread/
https://www.themaltmiller.co.uk/product ... 58-thread/
aka Rhys
Re: Sankey spares
Sorry that question was for simpleton. I may be wrong, but I thought the NRV is just a ball in the coupler, or at least that's the only thing I noticed in the beer part of the coupler.
- alexlark
- Under the Table
- Posts: 1403
- Joined: Thu May 02, 2013 12:29 pm
- Location: Rhondda, South Wales
Re: Sankey spares
You can get John Guest fittings that also incorporate a NRV. They have a brass thread on one side and a push fit on the other. I use them, they replace the ball and duck valve and are excellent quality.
Edit: like this (for beer): http://www.johnguest.com/product/inch-s ... t-adaptor/
Just make sure you check if your coupler is 1/2 inch first.
And this one is for gas:
http://www.johnguest.com/product/inch-s ... t-adaptor/
Edit: like this (for beer): http://www.johnguest.com/product/inch-s ... t-adaptor/
Just make sure you check if your coupler is 1/2 inch first.
And this one is for gas:
http://www.johnguest.com/product/inch-s ... t-adaptor/
Re: Sankey spares
Yeah the little ball and spring retainer. I appear to have lost some
Re: Sankey spares
I'm also missing a ball for a coupler I bought a while ago. I've just been doing a little googling, but can't seem to find anyone selling spares at the moment.
Apart from :
https://global.kegworks.com/draft-beer/ ... pler-parts
Which doesn't help, as they're in the US.
Apart from :
https://global.kegworks.com/draft-beer/ ... pler-parts
Which doesn't help, as they're in the US.
-
- Even further under the Table
- Posts: 2514
- Joined: Sun Apr 01, 2012 5:38 pm
- Location: Wirral, Merseyside
Re: Sankey spares
A bit cheaper from StonhelmHeron1952 wrote: ↑Sat Feb 24, 2018 6:14 pmhttps://www.aquacure.co.uk/john-guest-adaptors/page/2
Not cheap though
and Beer out
Best wishes
Dave
Dave
- alexlark
- Under the Table
- Posts: 1403
- Joined: Thu May 02, 2013 12:29 pm
- Location: Rhondda, South Wales
Re: Sankey spares
There are a few Sankey couplers on eBay for £24 / £25 that come with those JG fittings too.
Re: Sankey spares
Thanks for reminding me about Stonhelm, just down the road from me. They also do the DSI and te Micromatic gas non return duckbill inserts. I've a couple need replacing.
aka Rhys
-
- Drunk as a Skunk
- Posts: 996
- Joined: Sat Jul 21, 2012 11:12 pm
- Location: Garden of England
Re: Sankey spares
the john guest keg outlet adaptors do not have a NRV in them. only the gas inlet ones do
dazzled, doused in gin..
- MonsieurBadgerCheese
- Steady Drinker
- Posts: 46
- Joined: Wed Dec 23, 2015 8:01 pm
Re: Sankey spares
Afternoon,
Would anyone know of an European supplier for the O-Rings to fit the spear valve of an S (European) type Sankey Keg? It seems that the part is;
Taprite 45-0017-00
I have spent an age with Googgle, but can only find suppliers in the States. Thanks in advance.
MBC
Would anyone know of an European supplier for the O-Rings to fit the spear valve of an S (European) type Sankey Keg? It seems that the part is;
Taprite 45-0017-00
I have spent an age with Googgle, but can only find suppliers in the States. Thanks in advance.
MBC