Hi
Can anyone tell me what size John Guest reducer I need for the gas hose that is supplied with the GF pressure transfer kit?
I am currently using 3/8 beer line from the CO2 regulator for carbing my beer, and ideally want to run a splitter with a stop tap on one spur which has 3/8 out and then the GF gas hose connected to the 'reduced' size as the GF pipe is considerably smaller than 3/8.
Unfortunately I only have 3/8 JG fittings to hand.
Thanks for any advice.
GF pressure transfer JG reducer size?
-
orlando
- So far gone I'm on the way back again!
- Posts: 7197
- Joined: Thu Nov 17, 2011 3:22 pm
- Location: North Norfolk: Nearest breweries All Day Brewery, Salle. Panther, Reepham. Yetman's, Holt
Re: GF pressure transfer JG reducer size?
I don't have one but you could email The Malt Miller or any other GF supplier.
I am "The Little Red Brooster"
Fermenting:
Conditioning:
Drinking: Southwold Again,
Up Next: John Barleycorn (Barley Wine)
Planning: Winter drinking Beer
Fermenting:
Conditioning:
Drinking: Southwold Again,
Up Next: John Barleycorn (Barley Wine)
Planning: Winter drinking Beer
Re: GF pressure transfer JG reducer size?
Thanks for the respons, I think that's my next move, I think it's 8mm OD just need to find out what that translates to in JG fitting size... Any idea!? 
Re: GF pressure transfer JG reducer size?
If I recall correctly I've used 5/16" JG fittings before (I don't have a grainfather though sorry).